andyroo Posted September 11, 2005 Report Share Posted September 11, 2005 I cut the removal tabs off my ACS and now im trying to get the thing off. its stripped down to the last bit that screws to the crank (zoo cranks with the bashguard on) and it wont come off. Ive tried bashing it, i dont have a vice or a removal tool, but i do have a hacksaw! How shall i cut it off? Where should I cut it so it comes off? Please help! :P Quote Link to comment Share on other sites More sharing options...
Swize Posted September 11, 2005 Report Share Posted September 11, 2005 If I am right the bit that is left is a square bit ? If so heat it up with a blowtorch then get a big spanner and an extenshion or something on and turn, not a clue how to hold the crank ect ect :P but a vice is a very useful tool :D . Sam Quote Link to comment Share on other sites More sharing options...
Josephine Posted September 11, 2005 Report Share Posted September 11, 2005 (edited) Blowtorch + cold chisel + big f**k-off lump hammer + vice + brute force = solution Just place the chisel in the hole the pawls normally rest in and hit it hard once you've got it hot :P Joe Edited September 11, 2005 by Josephine Quote Link to comment Share on other sites More sharing options...
Bionic Balls Posted September 12, 2005 Report Share Posted September 12, 2005 you really need a vice.... <_< I cannot see a way to do it without... adam Quote Link to comment Share on other sites More sharing options...
duncanshaw@scotland Posted September 12, 2005 Report Share Posted September 12, 2005 get yourself an angle grinder and a cold chisel.vise would definately help though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.