Onza Kieron Posted July 11, 2005 Report Share Posted July 11, 2005 AS the title says, how do you remove the bashgaurd from tensiles? ive tried chain whip but i cant get enough leverage on the lever. Kieron Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted July 11, 2005 Report Share Posted July 11, 2005 Clamp the bashring in a vice, and turn the crank arm with a mallet/big bit of pipe (N) Quote Link to comment Share on other sites More sharing options...
JT! Posted July 11, 2005 Report Share Posted July 11, 2005 Clamp the bashring in a vice, and turn the crank arm with a mallet/big bit of pipe (N) ← Tried, and tested. :lol: :P That's what i did anyway, well, my dad did. If you haven't got a mellet, use a lump of wood and a normal hammer. Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 11, 2005 Report Share Posted July 11, 2005 Alternatively, you can take everything off the bashring, and then put 4 strong bolts through some of the pre-drilled holes, then clamp that bit in the vice. It can help keep the bashring steady and stop it from spinning loads, which I found was a bit of a problem when I was trying to remove mine. Quote Link to comment Share on other sites More sharing options...
Onza Kieron Posted July 11, 2005 Author Report Share Posted July 11, 2005 Alright, cheers for the solutions ill give them a go. Kieron (N) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.