nb88 Posted June 14, 2005 Report Share Posted June 14, 2005 Hey all... just nitromorsed my magura lever body, and slaves, and its all done now :) . I made sure i washed out the inside thoroughly so the nitromors cant damage the seals as they are plastic - but is it possible that it could corrode it or whatever? Just worried incase i should do some more washing and bleed it about 50 times to make sure its all clean :( cheers noz. Quote Link to comment Share on other sites More sharing options...
Corish Posted June 14, 2005 Report Share Posted June 14, 2005 I'd clean it out thoroughly first just keep cleanin and cleanin just incase. Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted June 15, 2005 Report Share Posted June 15, 2005 While we're on the subject of this, sorry to butt in on the thread, i left some magura cylinders to soak in nitromors, just wondering if it has knackered the internals? Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted June 15, 2005 Report Share Posted June 15, 2005 also while we're ob this subject. what is nitromors? :blink: Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted June 15, 2005 Report Share Posted June 15, 2005 Uber crazy ass mofo powerful paint stripper. Quote Link to comment Share on other sites More sharing options...
Ben Geary Posted June 15, 2005 Report Share Posted June 15, 2005 also while we're ob this subject. what is nitromors? :o ← nitromors is a paint stripper :blink:. ben :'( Quote Link to comment Share on other sites More sharing options...
Danny Posted June 15, 2005 Report Share Posted June 15, 2005 i left some magura cylinders to soak in nitromors, just wondering if it has knackered the internals? ← Probably. Magura slaves aint even painted on the inside so just paint it on with a brush to the outside leave it about a minute and the shite magura paint comes straght off no problems. Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted June 15, 2005 Report Share Posted June 15, 2005 Probably. Magura slaves aint even painted on the inside so just paint it on with a brush to the outside leave it about a minute and the shite magura paint comes straght off no problems. ← I know there's no paint on the inside, and if there was i wouldn't be bothered cos i wouldn't see it anyway, but cos i'm lazy, i just dumped them in a pot of nitromors, i didn't have a brush handy :blink:" But i haven't bled them yet so i don't know if they are gonna leak :'( Quote Link to comment Share on other sites More sharing options...
Danny Posted June 15, 2005 Report Share Posted June 15, 2005 Only one way to find out :blink: Nitromors didnt eat through my latex gloves when i was using it so u never know you mite be ok :'( Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted June 15, 2005 Report Share Posted June 15, 2005 I've just beeen playing with them now and it seems all good :blink: Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 15, 2005 Report Share Posted June 15, 2005 Only one way to find out :blink: Nitromors didnt eat through my latex gloves when i was using it so u never know you mite be ok :'( ← It ate my tooth brush a good'un. When I stripped my magg I was just carefull with the paintbrush and went round the seals, then wiped it clean with a rag. Sam Quote Link to comment Share on other sites More sharing options...
Danny Posted June 15, 2005 Report Share Posted June 15, 2005 I used a toothbrush when i did mine too no problems. Suppose it depends on the type of plastic :blink: Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 15, 2005 Report Share Posted June 15, 2005 I used a toothbrush when i did mine too no problems. Suppose it depends on the type of plastic :blink: ← Well.. I did leave mine in over night :'(" I like your avatar btw :o Quote Link to comment Share on other sites More sharing options...
scott-mad Posted June 16, 2005 Report Share Posted June 16, 2005 where is this stuff available from? and also what are the precautions to take? Quote Link to comment Share on other sites More sharing options...
Siders77 Posted June 16, 2005 Report Share Posted June 16, 2005 (edited) It's available from B&Q or any good hardware store you can even get it from Woolworths! I didn't take any precautions to be honest. But when you've stripped the paint off make sure you get ALL of the excess off otherwise the Nitromorse will eat through the new paint you put on :'( Edited June 16, 2005 by Siders77 Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted June 16, 2005 Report Share Posted June 16, 2005 Just make sure you dont get it in your eyes!!! Its a acid... so you seals are more then likyl hucked! Quote Link to comment Share on other sites More sharing options...
Urpedigreechumdog Posted June 16, 2005 Report Share Posted June 16, 2005 Just make sure you dont get it in your eyes!!! Its a acid... so you seals are more then likyl hucked! ← Well guess again, they're not. I bled it yesterday and they're fine, as you'd find out if you read my previsous post. And any tit who gets nitromors in thier eye deserves to be blind. Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted June 16, 2005 Report Share Posted June 16, 2005 I've had it all up my arm. Stings bad :'( Quote Link to comment Share on other sites More sharing options...
Danny Posted June 16, 2005 Report Share Posted June 16, 2005 Wear gloves and something covering your arms. I got it up my arms once it wasnt pleasent. Quote Link to comment Share on other sites More sharing options...
downhill_rob2@hotmail.com Posted June 16, 2005 Report Share Posted June 16, 2005 Wear gloves and something covering your arms. I got it up my arms once it wasnt pleasent. ← Known me I would just pour it up my arm and just stand there screaming and laughing at the same time :'( And known me if i wore glove, somehow the acid will get inside and burn my hands off again! lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.