holroyd-wanna-be Posted May 16, 2005 Report Share Posted May 16, 2005 Afternoon, all last week my disc kept making a chinging noise when i tapped the bars so i took the brake off and checked it over. I noticed one of my rotor bolts was loose and would not tighten up :lol: . This is the first time i tok the bolt out and now it just wont tighten properly and all the bolts had thread lock on. I have thought about using Araldite on the bolt but have i got a chance of getting the bolt out if i use it? B) Soory to waffle. Lester :P Quote Link to comment Share on other sites More sharing options...
GuyJames Posted May 16, 2005 Report Share Posted May 16, 2005 Sounds like you have cross-threaded it i.e mucked up the thread on the hub. Tap the thread again and hopefully everything will be alright :lol: Quote Link to comment Share on other sites More sharing options...
sir trial a lot Posted May 16, 2005 Report Share Posted May 16, 2005 i had this problem with a crank bolt and what had happened is the loktite has bunged up the hole or its cross threaded. as i say loctite bunged up the hole on my bb and the crank bolt wouldnt tighten. try using some de-greaser on a loth and a screw driver to scratch the loctite out of the bottom of the hole. :lol: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.