luke_jay Posted May 15, 2005 Report Share Posted May 15, 2005 ok, ive just bought a new cassette. and i want to take of a few cogs so that its a 6speed ,but im not sure if i need special spacers or anything, anybody know? Cheers Luke (Y) Quote Link to comment Share on other sites More sharing options...
STEVE-0 Posted May 15, 2005 Report Share Posted May 15, 2005 Not really just the same siza as the cassette lock ring, i think. DMR do some if your stuck. Steve Quote Link to comment Share on other sites More sharing options...
luke_jay Posted May 15, 2005 Author Report Share Posted May 15, 2005 Not really just the same siza as the cassette lock ring, i think. DMR do some if your stuck. Steve ← oh rite because i tried with some spacers from an old cassette and when i tried to tighten the cassettes back up it was still all loose Quote Link to comment Share on other sites More sharing options...
Bionic Balls Posted May 15, 2005 Report Share Posted May 15, 2005 you need at least one more spacer then (Y) adam Quote Link to comment Share on other sites More sharing options...
Danny Posted May 15, 2005 Report Share Posted May 15, 2005 I have the top 2 cogs missing from my cassette and 1 extra one put in and ive just padded it out with some ground down rings (Y) But cassette spacers work aswell. Try to put the pins back into the cassette though as it helps spread the load and means your trials ring wont dig in as much. Quote Link to comment Share on other sites More sharing options...
Nick Garland Posted May 15, 2005 Report Share Posted May 15, 2005 If Im not mistaken, I think you might be able to stick headset spacers on, probaboly the wrong width but I think the actual diameter is the right size. Never tried it though, just compated a headset spacer with cassette one and they looked damn close. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.