Jump to content

Disc Cable


Sketchy

Recommended Posts

I just got some clarks stainless cable this morning (for my bmx) its the smoothest, flexiest cable I have ever felt! This is with no lube or anything. I turned the cable through tight bends but it still slid butterly smooth. With some wd40 in there I cant imagien a smoother cable!

Link to comment
Share on other sites

I recently fitted my avid (about two weeks ago) and im using a fibrax cable. It was only £4 for inner and outer with loads of cable to spare when you have cut off what you need. I got it from my local bike shop though so i dont know where else you could get it from, probably chain reaction cycles etc. I recommend it for performance and value (Y)

Link to comment
Share on other sites

I aint too keen on nokon. I have had it twice on my trials bike and front and rear on my bmx.

On my trials bike, it was the dogs danglys, but I found it crimped quite easily and it got rougher and rougher, I tryed renewing it with a new inner, but the kink in the cable just made it always feel rough.

Same story on my bmx except they only worked (reasonably) well for a couple of weeks untill they were unusable.

straight out of the box the nokon isnt the smoothest either, even cheap no name cables felt better.

Link to comment
Share on other sites

Even the best cable will perform dissapointingly unless cut correctly , meaning nice clean cut staight across the top , filing off any diagonal excess if need be . Clean / replace your ferules aswell , when necessary .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...