Derek Gibson Posted May 5, 2005 Report Share Posted May 5, 2005 i have a onza t pro frame and isis cranks so i need a bottom bracket wich is isis for my t pro but i dont no what size i need does anybody no Quote Link to comment Share on other sites More sharing options...
Inspired Dave Posted May 5, 2005 Report Share Posted May 5, 2005 122.5 should do you proud Quote Link to comment Share on other sites More sharing options...
Derek Gibson Posted May 5, 2005 Author Report Share Posted May 5, 2005 where can i get one from Quote Link to comment Share on other sites More sharing options...
Impacted. Posted May 5, 2005 Report Share Posted May 5, 2005 Tartybikes. Quote Link to comment Share on other sites More sharing options...
JT! Posted May 5, 2005 Report Share Posted May 5, 2005 I would say that 122mm would be too small, or it would just fit. I have a 124mm and i wouldnn't like to go any shorter realy. Quote Link to comment Share on other sites More sharing options...
Derek Gibson Posted May 9, 2005 Author Report Share Posted May 9, 2005 i have been told 122.5mm would fit nicely and no lower than 124mm whats going off Quote Link to comment Share on other sites More sharing options...
Tartridge Posted May 9, 2005 Report Share Posted May 9, 2005 The milk in my fridge. Quote Link to comment Share on other sites More sharing options...
JT! Posted May 9, 2005 Report Share Posted May 9, 2005 The milk in my fridge. ← (Y) No one's going to be 100% sure, 122.5mm will be fine round the bb area, but the cranks could hit the stays. Depends what cranks you have. If you have musclemans, go for 122.5mm. (But don't blame me if it dosn't work out :S ) :D Quote Link to comment Share on other sites More sharing options...
Derek Gibson Posted May 9, 2005 Author Report Share Posted May 9, 2005 i have monty x lite cranks Quote Link to comment Share on other sites More sharing options...
Biff Posted May 9, 2005 Report Share Posted May 9, 2005 RIGHT i have monty x-lite cranks on a t-pro i do have a 118mm and it rubs so i've had to put spacers behind crank arm! get a 122mm (Y) Biff (close topic) Quote Link to comment Share on other sites More sharing options...
andyroo Posted May 10, 2005 Report Share Posted May 10, 2005 I have ISIS Zoo! Cranks with bashring and ACS freewheel on a 118 bb, and the removal tabs on the freewheel just rubbed, so 118 without a bashring would fit fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.