nb88 Posted May 4, 2005 Report Share Posted May 4, 2005 Hey all...just wondering if all the ball bearing in the RB lever is just acting as a 'cone' shaped grub screw, and if so - can i use a normal magura one in it? Cheers. Noz. Link to comment Share on other sites More sharing options...
Punkrider Posted May 4, 2005 Report Share Posted May 4, 2005 I ran a standard Magura grub screw in my RB lever, worked fine ;) Cheers Adam Link to comment Share on other sites More sharing options...
quick_spider Posted May 4, 2005 Report Share Posted May 4, 2005 It seals the bleed port on the lever - don't see why a Magura one wouldn't work as long as it's the same thread. Alternatively pop down to your LBS and ask them for a 3/32" BB and a normal grub screw. Jon Link to comment Share on other sites More sharing options...
Frenchman Posted May 4, 2005 Report Share Posted May 4, 2005 Yep a maggy grub screw will work and it is the same thread. I ran one on my rb with no problems and then ran another with the point ground off and a bb in there. cheers Link to comment Share on other sites More sharing options...
Recommended Posts