mod_rider Posted April 25, 2005 Report Share Posted April 25, 2005 Good evenin all, I have an echo crankset with a fixed sprocket on, and has been for a while now. It has now become buckled to the extent where its ridiculously tight one side, and so lose it hits the chainstay on the other. My question is, will it be possible to change the sprocket and the threads on the cranks to be still ok, or do I need new cranks? Cheers Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted April 25, 2005 Report Share Posted April 25, 2005 dont see why not, just inspect the threads? lol Quote Link to comment Share on other sites More sharing options...
spunkey_monkey_boy Posted April 25, 2005 Report Share Posted April 25, 2005 also if they're the new cranks then they have 2 sets of threads meaning if you screw one set you can take them off and screw another set on... Quote Link to comment Share on other sites More sharing options...
Will Arnold Posted April 25, 2005 Report Share Posted April 25, 2005 also if they're the new cranks then they have 2 sets of threads meaning if you screw one set you can take them off and screw another set on... ← lol, are you trying to confuze us? (Y) tehehe Quote Link to comment Share on other sites More sharing options...
spunkey_monkey_boy Posted April 25, 2005 Report Share Posted April 25, 2005 yeah i realize on re reading it that was more confusing than helpful - heres the edited version: just rip the f**ker off!!! Quote Link to comment Share on other sites More sharing options...
mod_rider Posted April 26, 2005 Author Report Share Posted April 26, 2005 Cheers Guys I'll do my best. Much Appreciated Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted April 26, 2005 Report Share Posted April 26, 2005 Are you sure your bb isn't bent? Quote Link to comment Share on other sites More sharing options...
Apollo13 Posted April 26, 2005 Report Share Posted April 26, 2005 You should be able to, theres nothing to stop you really. Nick :lol: Quote Link to comment Share on other sites More sharing options...
Punkrider Posted April 26, 2005 Report Share Posted April 26, 2005 As Anal Teflon says, are you sure that you haven't bent your bottom bracket, check that before you try hacking your sprocket off :lol:" Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.