011001000110010101110010 Posted January 27, 2005 Report Share Posted January 27, 2005 Well, do they? If anyone knows please let me know. Need to move the brake mounts on my bmx. Cheers, Fred Quote Link to comment Share on other sites More sharing options...
Tartridge Posted January 27, 2005 Report Share Posted January 27, 2005 Chop the old ones off, and fix them back on? I doubt they'd 'exist' as a standard part, since all frame tubes are different shapes. Just rob some of another frame :ermm: Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted January 27, 2005 Author Report Share Posted January 27, 2005 Thats what I was going to do, but rather than risk screwing it up cutting them off. In an ideal world I'd like new ones... :ermm: Quote Link to comment Share on other sites More sharing options...
rich4130 Posted January 27, 2005 Report Share Posted January 27, 2005 (edited) Chop the old ones off, and fix them back on? I doubt they'd 'exist' as a standard part, since all frame tubes are different shapes. Just rob some of another frame :P ← You can get V brake ones from ceeway, thats where I got mine from. www.ceeeway.com I wouldn't bother brazing them mine were tig welded fine :P EDIT: I have some cutoff pashley forks somewhere. Edited January 27, 2005 by rich4130 Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted January 27, 2005 Author Report Share Posted January 27, 2005 I can't seem to find any on there site, am I being blind? Quote Link to comment Share on other sites More sharing options...
rich4130 Posted January 27, 2005 Report Share Posted January 27, 2005 http://www.ceeway.com/Bosses.htm U want H8. there for tube about 16mm OD, but it doesnt matter really. Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted January 27, 2005 Author Report Share Posted January 27, 2005 Ok, cheers mante. :P Quote Link to comment Share on other sites More sharing options...
TheMunn Posted January 27, 2005 Report Share Posted January 27, 2005 One of my mates said about getting a plate made up that goes on his U-brake lugs that convert's it to vee, not sure where to get one or anything though, but it might be something to look into ? Quote Link to comment Share on other sites More sharing options...
hititfaster Posted January 27, 2005 Report Share Posted January 27, 2005 Thing you mean an anchor plate. DMR make them - you take the U brake mounts out (unscrew them) and fit this plate, which has the mounts in the right place for V brakes. As for the mounts, when I re-welded my Pash forks for my 24" wheels, all I did was carefully cut down the original weld - or around it as much as you can to prevent you cutting too deep and damaging the forks/frame - threaded a 5mm bolt in there and used it as a lever to break it off, tidied them and the forks up with a file and a flap disk on an angle grinder and re-used them. Easy as long as you're careful :P Quote Link to comment Share on other sites More sharing options...
thechink Posted January 27, 2005 Report Share Posted January 27, 2005 look at that website and go on the fork crown page. you could make custom forks. buy a crown mould some carbon fibre and bobs your uncle. cheapo coust forks. thechink Quote Link to comment Share on other sites More sharing options...
hititfaster Posted January 27, 2005 Report Share Posted January 27, 2005 I've just spent about 40 minutes looking aroung that site... lets just say I've got a few more ideas now :P Roll on Easter! Quote Link to comment Share on other sites More sharing options...
011001000110010101110010 Posted January 28, 2005 Author Report Share Posted January 28, 2005 Thank you for your help but thats not what im after. See the problem is I have put micro drive on my bmx with the brake on the chainstay but the chain rubs the brake. Quote Link to comment Share on other sites More sharing options...
rich4130 Posted January 28, 2005 Report Share Posted January 28, 2005 Put em on the seay stay then :ermm:" Quote Link to comment Share on other sites More sharing options...
JT! Posted January 28, 2005 Report Share Posted January 28, 2005 I supose i have one for sale. Its a big horse shoe thing that you "jubily clip" (i think thats what they're called) onto the frame. I have one laying around i dont need anymore. :ermm: Quote Link to comment Share on other sites More sharing options...
Punkrider Posted January 28, 2005 Report Share Posted January 28, 2005 They sell the Anchor plates here :ermm: Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.