Whiteboy Posted September 14, 2004 Report Share Posted September 14, 2004 ok just bought one and im a bit woried as when i spin it im counting 26 points. its the green one and states that its the trials 72 one. have i got something rong does it need to be bed in or something? also inside the freeheel are the ball bearing like sealed in a race thingy or are they like a acs were all the bb are loose? thanks Link to comment Share on other sites More sharing options...
Toby Posted September 14, 2004 Report Share Posted September 14, 2004 there sealed bearings, it has 72 ingagements dw just ride it (i have one too) Link to comment Share on other sites More sharing options...
JonMack Posted September 15, 2004 Report Share Posted September 15, 2004 how come i am only countin 36 engadjment then? will it sort of bed in to 72? ← Before you were only counting 26 :) . Just ride it, and it will feel like 72. Stop being a little bitch. (BaseketBall, Skweek, Tom = Skweek for those that have seen it) Link to comment Share on other sites More sharing options...
Whiteboy Posted September 15, 2004 Author Report Share Posted September 15, 2004 why would the bb's fall out its sealed! read the posts, i know this because ive taken mine apart ← are they easy to take apart? do you have to use the little pin tool? Link to comment Share on other sites More sharing options...
Toby Posted September 15, 2004 Report Share Posted September 15, 2004 are they easy to take apart? do you have to use the little pin tool? ← all u do is take a hammer and a small scewdriver, place it in one of the 2 holes on the back of the freewheel(the green bit) make shore your cranks are still on the bike, then undo the green bit by hitting it clockwise i think (towards the back of the bike) then once its loose take your cranks off and then take the green bit right off then with your hands take the cog thing off, now you should have the cog with all the teeth in it and sealed bearing in one hand, and all the pawls still on the crank, hopefully that made sense :"> Link to comment Share on other sites More sharing options...
Whiteboy Posted September 15, 2004 Author Report Share Posted September 15, 2004 ok thanks. how many sets of paws and springs in there? also how many sets of bearings? are they easy to asseble again? are the paws and springs easy to put back in? thetre not all guna pop out and il never be able to gey em back in? Link to comment Share on other sites More sharing options...
Toby Posted September 15, 2004 Report Share Posted September 15, 2004 (edited) ok thanks. how many sets of paws and springs in there? also how many sets of bearings? are they easy to asseble again? are the paws and springs easy to put back in? thetre not all guna pop out and il never be able to gey em back in? ← thers six pawls 3 longer ones and 3 shorter ones no they dont all pop out, there is one set of bearings inside the cog that dont pop out, once you got it apart its pritty simple the spings and pawls come out easily just make shore you put them back in the right place then when you put the cog back on to the pawls use something small to pop all the pawls in side the cog(you will know what i mean when u take it apart) Edited September 15, 2004 by koxx_lover Link to comment Share on other sites More sharing options...
Tartridge Posted September 15, 2004 Report Share Posted September 15, 2004 Oh my jesus christ, Mr Question is at it again! Just ride the bugger. If its got 36 clicks, its not a 72 click one... pretty obvious really?! Link to comment Share on other sites More sharing options...
Recommended Posts