Sam Song Posted 22 hours ago Report Share Posted 22 hours ago (edited) I bought a spare Industry Nine Hydra wheel from local Facebook marketplace with the following specs: - Hydra rear classic 142mm thruaxle. I figured i could make use of this rear wheel by swapping the 135 through axle endcaps from my rear Singlespeed Hydra that fits on my Hex. As it turns out, the end cap from my singlespeed Hydra does not fit over what appears to be a smaller axle on the new Hydra classic 142 through axle hub i bought. The endcap will wiggle over it. You can see that the Singlespeed axle on the left has a larger diameter What axle do I need to make my non boost classic Hydra work on the Hex? Industry Nine sells 135 x 12 endcaps but it does not specify whether it is for Singlespeed rear or Non-boost classic rear. Edited 22 hours ago by Sam Song Quote Link to comment Share on other sites More sharing options...
Chakers1998 Posted 4 hours ago Report Share Posted 4 hours ago @onzatpro09 I summon you, bike mechanic and i9 stockist! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.