Jamie1234429292 Posted January 10, 2021 Report Share Posted January 10, 2021 I was wondering what would happen if I was to run a splitter to my hs33s and also put a crossover between them, would it equalise the pressure or just be a waste of my money? 1 Quote Link to comment Share on other sites More sharing options...
isitafox Posted January 10, 2021 Report Share Posted January 10, 2021 Why would you need a crossover if you were going to split the feed? Quote Link to comment Share on other sites More sharing options...
Jamie1234429292 Posted January 10, 2021 Author Report Share Posted January 10, 2021 I wouldn't this is just hypothetical Quote Link to comment Share on other sites More sharing options...
isitafox Posted January 10, 2021 Report Share Posted January 10, 2021 Wouldn't really make any difference whatsoever, if anything performance would be slightly worse. The split lines would be pushing the pistons in and the crossover would just hold fluid. You could potentially split the hose and then split each line again to run feeds into both holes in the slaves but I can't imagine it would improve the feel. Either way it would be almost impossible to bleed the system. 1 Quote Link to comment Share on other sites More sharing options...
Sandbugg Posted January 10, 2021 Report Share Posted January 10, 2021 Pressure applys force equally in all directions anyway if you have one piston moving less than the other it must be because there is more resistance in that piston 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.