Scott Gibbs Posted November 12, 2018 Report Share Posted November 12, 2018 Who was it on here that was converting the Pro2/4 to 116mm spacing? Quote Link to comment Share on other sites More sharing options...
trialsalot Posted November 13, 2018 Report Share Posted November 13, 2018 Euan Beaden most probably. 1 Quote Link to comment Share on other sites More sharing options...
LEON Posted November 13, 2018 Report Share Posted November 13, 2018 I'm pretty Sure Flipp had or has one. Quote Link to comment Share on other sites More sharing options...
Herbertlemon102 Posted November 13, 2018 Report Share Posted November 13, 2018 (edited) flipps was made by josh leech, mine and @isitafox was made by alex dark, but neither of them can produce any more due to current circumstances. i went for them over euan because the wheel rim wasnt dished, and it was a much more solid build. from what id heard, Euan just machines the driveside down. when i asked him if he could do mine, he said it wasnt possible for him (110mm) and the Alex went and did it perfectly anyway. so its a bit of a difficult one. Edited November 13, 2018 by Herbertlemon102 2 Quote Link to comment Share on other sites More sharing options...
bing Posted November 14, 2018 Report Share Posted November 14, 2018 The one I had was an Alex Dark version, engineering was spot on. Worked perfectly 1 Quote Link to comment Share on other sites More sharing options...
Herbertlemon102 Posted November 14, 2018 Report Share Posted November 14, 2018 25 minutes ago, bing said: The one I had was an Alex Dark version, engineering was spot on. Worked perfectly you had dave's. at one point i owned them both still miss 'em. Quote Link to comment Share on other sites More sharing options...
Julius Czar Posted November 16, 2018 Report Share Posted November 16, 2018 Is there a write up on how it’s done anywhere? I’ve got a 150mm pro 2 evo knocking around that I wouldn’t mind trying to convert. Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted November 16, 2018 Report Share Posted November 16, 2018 Are the flanges on the 150 wider than a normal 135? If so I would expect you to struggle! Quote Link to comment Share on other sites More sharing options...
isitafox Posted November 20, 2018 Report Share Posted November 20, 2018 Thought they were the same just different axle and end caps Quote Link to comment Share on other sites More sharing options...
Cap Posted November 20, 2018 Report Share Posted November 20, 2018 7 hours ago, isitafox said: Thought they were the same just different axle and end caps I think the 150 is a wider hub shell, the 142 is the same hub as the 135 with different end caps. Quote Link to comment Share on other sites More sharing options...
Julius Czar Posted November 21, 2018 Report Share Posted November 21, 2018 On 16/11/2018 at 11:59 AM, monkeyseemonkeydo said: Are the flanges on the 150 wider than a normal 135? If so I would expect you to struggle! The extra spacing with the 150 hubshells is in between the non driveside flange and the disk mount, so the disk mounts will have to go but that’s not an issue really as I don’t use disk brakes. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.