nigelhunt78 Posted January 3, 2018 Report Share Posted January 3, 2018 Hi All, I’m just getting back into trials after a long break and I’ve got my first ever bike with disc brakes. (SLX f&r with stock pads, hope trials rotor on the rear and a stock shimano rotor on the front). I’d say the brakes work fine, equivalent to my mountain bike but don’t have the out and out “bite” that I’m used to from HS33s etc. The question is; is there anything that can be done to improve the hold? Grind the rotor? Tar on the pads? Any suggestions would be gratefully received... the cheaper the better! Quote Link to comment Share on other sites More sharing options...
robkerly Posted January 3, 2018 Report Share Posted January 3, 2018 first up just make sure they are perfectly clean. boiling the rotors and pads will make sure they are as free from contaminates as possible. then make sure the calipers are set up perfectly square with the rotors. if a pad on one side is hitting first or if the pads are at an angle this will make a big difference. super anal levels of perfect alignment makes a noticeable difference. you can tell by pulling the brake lever on and off while looking really closely at the rotor, if it flexes to one side, or twists at all, it can be made better. If you get them running perfectly square and you still want more power, bigger rotors or softer pads are the solution. the brakes them selves have the potential to be plenty powerful. personally i find shimano brakes run best on shimano branded rotors, and I have had very good results from the trialtech branded after market pads 1 Quote Link to comment Share on other sites More sharing options...
nigelhunt78 Posted January 3, 2018 Author Report Share Posted January 3, 2018 Thanks for the reply! Boiling? As in put them in a pan of boiling water? I’ve not heard that one before! Doesn’t look like the trialtech pads are available for the slx brake... are there any other brands who do a Trials pad? Quote Link to comment Share on other sites More sharing options...
robkerly Posted January 3, 2018 Report Share Posted January 3, 2018 yep you can boil both the pads and the rotors. it does a pretty good job of lifting out oily residue. while they are out give the calipers a good clean. brake cleaner or meths on a rag work fine. the slx brake may come with a semi sintered pad designed to work under more heat and mud/water than a trials bike expects. my personal experience is that organic compound pads have the most bite from cold, therefore suiting trials better than sintered or kevlar compounds. i have used many of the cheaper after market pads in the past like AtoZ and superstar components and reckon the genuine shimano ones are better quality but give yours a thorough clean first and see how it goes Quote Link to comment Share on other sites More sharing options...
ogre Posted January 5, 2018 Report Share Posted January 5, 2018 trialtech or jitsie pads, trials specific rotor could help but tbf the shimano rotors are usually quite good. Quote Link to comment Share on other sites More sharing options...
roozor Posted January 10, 2018 Report Share Posted January 10, 2018 Changing my stock Magura mt trial pads to Jitsie's made a huge difference for me. Went from being good to VERY good. Since then, I've upped my rotors from 180 to 203. Crazy bite and power now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.