reece91 Posted November 6, 2016 Report Share Posted November 6, 2016 Hey guys, Purchased a new bike with a brand new White industries Eno freewheel, I understand they require a run in period outside of trials specific riding. I have checked the White Ind. website and they don't provide any info, neither does Tarty. Any recommendations for an acceptable run in time? Quote Link to comment Share on other sites More sharing options...
niconj Posted November 6, 2016 Report Share Posted November 6, 2016 (edited) 3h of cruising around and/or using WD40 to help speed up the process. Edited November 6, 2016 by niconj Quote Link to comment Share on other sites More sharing options...
BJ. Posted November 6, 2016 Report Share Posted November 6, 2016 Quickest way is to just disassembled, clean out any grease from the pawls and ratchet and then assemble. No run in period will be needed afterwards. Quote Link to comment Share on other sites More sharing options...
bing Posted November 6, 2016 Report Share Posted November 6, 2016 Swill it out in a bowl of petrol, fill with 3 in 1 oil, go and ride for a bit, nothing too heavy, then take it back off and swill it out again with petrol. Set it on fire to burn all the petrol out. Then lube up with 3 in 1 oil again and it should be spot on. The only thing I did different was used a freewheel tool in a drill with an m10 bolt to save taking it on and off the bike Quote Link to comment Share on other sites More sharing options...
Dan_Trials Posted November 10, 2016 Report Share Posted November 10, 2016 What if he's looking for a method that won't throw his warranty out the window? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.