trials hoe Posted April 13, 2013 Report Share Posted April 13, 2013 right so i've just gone dual maggie, and went to undo the bolt to bleed it and it went all gay and rounded its self....... bolt is exactly as per the old pic below - any ideas how i can get this out? i doubt cutting a slot into the head will do the job and the bolt head is on an angle so i cant whip the lever off and grip it in the vice any help would be much appreciated guys chris Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted April 13, 2013 Report Share Posted April 13, 2013 The slot method works well although it looks like it may be awkward to achieve in that location Quote Link to comment Share on other sites More sharing options...
trials hoe Posted April 13, 2013 Author Report Share Posted April 13, 2013 The slot method works well although it looks like it may be awkward to achieve in that location i can take the lever off no problem, i'm not sure there is enough material to lever against to undo it. i don't want to end up taking the whole head off it, then i'll be f**ked Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted April 13, 2013 Report Share Posted April 13, 2013 Araldite an allen key into the bolt head then? Quote Link to comment Share on other sites More sharing options...
trials hoe Posted April 13, 2013 Author Report Share Posted April 13, 2013 Araldite an allen key into the bolt head then? managed to bash a torx bit in and it worked. disaster has been averted well i guess this thead is now pointless hahah cheers anyway 1 Quote Link to comment Share on other sites More sharing options...
dezmtber Posted April 13, 2013 Report Share Posted April 13, 2013 I was going to say torx key it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.