banashapan Posted February 16, 2013 Report Share Posted February 16, 2013 (edited) Been off the trials scene for quite a while, in the summer I bought this frame from here. Over the months I've been buying bits and last weekend saw its completion. Built up with a combo of new and 2nd hand bits. Needs some rides to define set-up a little... Here goes- Spec as follows- Frame: Inspired Fourplay Forks : Zoo Python Headset: Echo BB: Trialtech Cranks: Middleburn RS7 Chainring: Pace 20t Pedals: Trialtech Seatpost: Easton Seatpost clamp: Thomson Seat: Stripped Selle SLR Tensioner: Rohloff Front Brake: Hope trial with tech lever Rear brake: HS33 Hubs: Hope Pro2 Evo Rims: Echo Tyres: Holy Rollers Tubes: Kenda DH Bars: Trialtech high rise Stem: Trialtech welded 70 x 25 Grips: Lizard Skins Edited February 16, 2013 by banashapan Quote Link to comment Share on other sites More sharing options...
XYXLV Posted February 16, 2013 Report Share Posted February 16, 2013 (edited) like the color... Edited February 16, 2013 by XYXLV Quote Link to comment Share on other sites More sharing options...
banashapan Posted February 16, 2013 Author Report Share Posted February 16, 2013 Ha no I don't, but thanks Quote Link to comment Share on other sites More sharing options...
CurtisRider Posted February 16, 2013 Report Share Posted February 16, 2013 Thats looks great! The seat suits it really well, reminds me of the Leeson carbon one. Any chance you can get the post on a lathe and turn it down so that it sits lower? I did that before on my Base years ago and it looked a ton better Quote Link to comment Share on other sites More sharing options...
banashapan Posted February 16, 2013 Author Report Share Posted February 16, 2013 Thats looks great! The seat suits it really well, reminds me of the Leeson carbon one. Any chance you can get the post on a lathe and turn it down so that it sits lower? I did that before on my Base years ago and it looked a ton better Thanks Paul. The seat post has a slight lay-back as you can see... and the cast lay-back part is just smaller in external diameter than the post itself! So for the best clamping position is where it's at currently. Quote Link to comment Share on other sites More sharing options...
shercofray Posted February 16, 2013 Report Share Posted February 16, 2013 Like what you've done with it! Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted February 16, 2013 Report Share Posted February 16, 2013 looks cool! Quote Link to comment Share on other sites More sharing options...
BradJohnson Posted February 16, 2013 Report Share Posted February 16, 2013 That looks CLEAN! Quote Link to comment Share on other sites More sharing options...
bikeperson45 Posted February 17, 2013 Report Share Posted February 17, 2013 Seat is lovely jubbly, hate them on mountain bikes but works on this. Quote Link to comment Share on other sites More sharing options...
Tom Booth Posted February 17, 2013 Report Share Posted February 17, 2013 Luuuuuuurvely. Quote Link to comment Share on other sites More sharing options...
Ross McArthur Posted February 17, 2013 Report Share Posted February 17, 2013 Mint! Put the stackers under your stem though. 1 Quote Link to comment Share on other sites More sharing options...
banashapan Posted February 17, 2013 Author Report Share Posted February 17, 2013 Thanks guys. Spacers are there while I get used to it and adjustment is there if I need Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.