tdubz Posted November 25, 2012 Report Share Posted November 25, 2012 Moved from pro2 to freewheel 1st issue when i tighten cranks onto bottom bracket they sit flush to the frame bb so wont spin, tried using a small shim but it killed my bottom bracket 2nd issue cant get the chain line right on my gusset tank chain since going to ffw, its rubbing the chainstay 3rd issue cant get the chain tension using snail cams even at the largest section of the cam really regretting doing ffw at the moment seems to have made my bike terrible cranks i have are these bb i had (possibly get another if will work) is this freewheel is this frame is a because 24 pure trials gusset tank chain monty cams 14t sprocket Quote Link to comment Share on other sites More sharing options...
Blake Posted November 25, 2012 Report Share Posted November 25, 2012 Could we have some pictures please? Quote Link to comment Share on other sites More sharing options...
SamKidney Posted November 25, 2012 Report Share Posted November 25, 2012 (edited) Wider bb. Trialtech Sport lites are good, or even the cheaper Race bb. Narrower chain. Highly recommend the KMC Z610Hx 1/8" Cams with a wider range of adjustment, Echo TR Will sort your issues. Edited November 25, 2012 by Echo Lite 09 Quote Link to comment Share on other sites More sharing options...
Blake Posted November 25, 2012 Report Share Posted November 25, 2012 Wider bb. Trialtech Sport lites are good, or even the cheaper Race bb. Narrower chain. Highly recommend the KMC Z610Hx 1/8" Cams with a wider range of adjustment, Echo TR Will sort your issues. I thought the TR cams have a very small amount of adjustment? Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted November 25, 2012 Report Share Posted November 25, 2012 Are you using a bashring? Quote Link to comment Share on other sites More sharing options...
customrider-Rhys Posted November 25, 2012 Report Share Posted November 25, 2012 (edited) question, have you tried shortening your chain? Edited November 25, 2012 by customrider-Rhys Quote Link to comment Share on other sites More sharing options...
tdubz Posted November 25, 2012 Author Report Share Posted November 25, 2012 Yeah tarty bashring Quote Link to comment Share on other sites More sharing options...
SamKidney Posted November 25, 2012 Report Share Posted November 25, 2012 Are you using a bashring? TR's have a decent amount of adjustment. More than Montys. Quote Link to comment Share on other sites More sharing options...
N.Wood Posted November 26, 2012 Report Share Posted November 26, 2012 Can increase the cams effective range by using a larger headed bolt or putting a washer under the bolt for the cam to butt up against. Did this on my Yaabaa, was fine. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.