Liamd-24 Posted November 8, 2012 Report Share Posted November 8, 2012 Hey I have no idea how to put it together or even if I'm missing anything? Any help would be awesome I think I may be missing some things? These are the only parts I have Thanks Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted November 8, 2012 Report Share Posted November 8, 2012 http://lmgtfy.com/?q=hope+headset+instructions Quote Link to comment Share on other sites More sharing options...
Liamd-24 Posted November 8, 2012 Author Report Share Posted November 8, 2012 I have no idea what model it is and I can't understand the diagram which is why I posted on here Thanks anyway Quote Link to comment Share on other sites More sharing options...
Blake Posted November 8, 2012 Report Share Posted November 8, 2012 looks like it's all there? Quote Link to comment Share on other sites More sharing options...
dezmtber Posted November 8, 2012 Report Share Posted November 8, 2012 It's one of the older hope headsets you have. Starting from the bottom You will have the crown race. Metal part you press onto the fork. It should have an o ring on it. Then the bearing. Then frame cup. The top.first the frame cup. Then bearing, then the compression ring with the slit in it. And sitting ontop the top cap with seal o ring. Quote Link to comment Share on other sites More sharing options...
Mark W Posted November 8, 2012 Report Share Posted November 8, 2012 I have no idea what model it is and I can't understand the diagram which is why I posted on here Thanks anyway The first result in that link Dave posted up has everything you need to know Quote Link to comment Share on other sites More sharing options...
Liamd-24 Posted November 8, 2012 Author Report Share Posted November 8, 2012 Yea I had a look but it confused me aha And thanks man Quote Link to comment Share on other sites More sharing options...
Mark W Posted November 8, 2012 Report Share Posted November 8, 2012 They included the Hope HedDoctor setup in that diagram which makes things look a lot more complicated than they are - parts 13-19 are pretty much totally irrelevant to your situation. The cups and bearings are all in the right place in your headset now, you just need to get the crown race - the silver ring - onto your fork. Once that's on you can put your forks up through the head tube. Once they're in, it's just a case of putting the remaining upper race and seals on there. They can only really fit on there properly in one way so you should be able to get work it out once the bits are there in front of you Quote Link to comment Share on other sites More sharing options...
dezmtber Posted November 8, 2012 Report Share Posted November 8, 2012 Headset XC pre 07 - Exploded View this one is the correct one for you pal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.