ghostrider88 Posted September 24, 2012 Report Share Posted September 24, 2012 I'd take a small unnoticeable weight gain, for the longevity of my frame any day. if you can notice 50-100grams of weight, which is a medium size bag of crisps, on your bike, I'll show my arse in tesco's window. go and weigh 4 helicoil inserts, bet it's not even that much If you consider the weight of helicoil inserts we are talking about 10grams maybe less...It would be very good idea if they installed the helicoils from the start,no more crying for stripped threads on new frames. 1 Quote Link to comment Share on other sites More sharing options...
trials hoe Posted September 24, 2012 Report Share Posted September 24, 2012 or cut the heads off some bolts and use them as studs, that way if you strip the theads it wont be your frame thats f**ked and the studs would easy to get out with plyers or a wanker spanner. Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 24, 2012 Report Share Posted September 24, 2012 Middleburn made some screw on proto's but they never went to production (not totally sure why, but I'd imagine it being there's just no money in it for them), so you can kiss that dream goodbye Saw a set of those on ebay a few months ago. Quote Link to comment Share on other sites More sharing options...
Andeee Posted September 24, 2012 Report Share Posted September 24, 2012 Life time warranty Quote Link to comment Share on other sites More sharing options...
clerictgm Posted September 24, 2012 Report Share Posted September 24, 2012 Life time warranty I heared Koxx gives it. Lifetime warranty in trials? Kids dreams. Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 24, 2012 Report Share Posted September 24, 2012 I heared Koxx gives it. Lifetime warranty in trials? Kids dreams. Hence the topic title "Things You Wish Manufacturers Would Make" 3 Quote Link to comment Share on other sites More sharing options...
dezmtber Posted September 24, 2012 Report Share Posted September 24, 2012 "They're". But if you rode a bike with proper size wheels you'd understand that discs aren't a lot of kop for stocks. I didn't tell you guys about my new training bike I got 2 months ago Quote Link to comment Share on other sites More sharing options...
craigjames Posted September 24, 2012 Report Share Posted September 24, 2012 http://www.trials-fo...iti-p60-trials/ I didn't tell you guys about my new training bike I got 2 months ago Not really a 26" 'trials' bike though is it.... Quote Link to comment Share on other sites More sharing options...
customrider-Rhys Posted September 26, 2012 Report Share Posted September 26, 2012 ust tires in 19" and ust rims. i do already rin a maxxis creepy creawler with a 14" tube streched over my onza diamond rim on tubeless. its been good for the life of the tire which is now running out of tread not one puncture yet hope trial zone discs fitted too i dont see much need for hope rim brakes now i have these there ace i want to see someone make saints in 150mm with screw on freewheel fitment. i am not keen on the isis sytems in use there real heavy and bbs cost far to much to replace. How did you do the tubless idea? how did you put air in it? Quote Link to comment Share on other sites More sharing options...
dezmtber Posted September 27, 2012 Report Share Posted September 27, 2012 just make a stans no tubes rim strip out of a 14" innertube. www.notubes.com Quote Link to comment Share on other sites More sharing options...
Rusevelt Posted September 27, 2012 Report Share Posted September 27, 2012 (edited) Integrated hydraulic gyro set-up. Edited September 27, 2012 by Rusevelt Quote Link to comment Share on other sites More sharing options...
mat hudson Posted September 27, 2012 Report Share Posted September 27, 2012 It's not a random picture of a frame, threads are stripped and problem solved by this: forgive my retardation. but what have you done here? Quote Link to comment Share on other sites More sharing options...
bing Posted September 27, 2012 Author Report Share Posted September 27, 2012 Integrated hydraulic gyro set-up. you can already get hydraulic gyro's, think strait line make them. they aren't integrated though, I assume you mean in side the head tube? Quote Link to comment Share on other sites More sharing options...
bike_dummie Posted September 27, 2012 Report Share Posted September 27, 2012 Hydro giros would he no good for trials as they are very spongey due to they're design. Essentially when you pull the lever pushing fluid into a tube like compartment (Like a headset without the bit that goes in the frame) pushing a a ring down into another tube (Same design as the.previous) pushing the ring on top pushing fluid in the lower half through causing the pistols to go out. Badly explained but I tried. Quote Link to comment Share on other sites More sharing options...
Ben Gosden Posted September 27, 2012 Report Share Posted September 27, 2012 Inspired to bring out a mod. That would be interesting. Quote Link to comment Share on other sites More sharing options...
Matt Vandart Posted September 27, 2012 Report Share Posted September 27, 2012 Integrated hydraulic gyro set-up. done and it works well. Quote Link to comment Share on other sites More sharing options...
Jake. Posted September 27, 2012 Report Share Posted September 27, 2012 That would be interesting. They made a small mod for matty Quote Link to comment Share on other sites More sharing options...
bing Posted September 27, 2012 Author Report Share Posted September 27, 2012 done and it works well. who by? show us some pics lad 1 Quote Link to comment Share on other sites More sharing options...
Rusevelt Posted September 28, 2012 Report Share Posted September 28, 2012 done and it works well. By which manufacturer Matt, as i have only seen the Atomlab gyro which is basically an old German design that was used by former trials rider turned freerider Chris Smith. Quote Link to comment Share on other sites More sharing options...
Matthew62 Posted September 28, 2012 Report Share Posted September 28, 2012 Check out the new Nukeproof Rook bike. It has an integrated hydraulic gyro. I felt it. It felt nice. But i'm aware it's not a trials bike and further aware that you don't need a hydraulic gyro on a trials bike. Quote Link to comment Share on other sites More sharing options...
Azarathal Posted September 28, 2012 Report Share Posted September 28, 2012 I can imagine a hydraulic gyro would be okay on a 20/24/26 street bike with a powerful rear disc eg hopes/saints Quote Link to comment Share on other sites More sharing options...
SamKidney Posted September 28, 2012 Report Share Posted September 28, 2012 Trialtech forks in 24" with rear facing 4 bolt mounts. The same for urbans, but with rear facing 4 bolt mounts as against forward facing. Quote Link to comment Share on other sites More sharing options...
onza pro series guy Posted September 28, 2012 Report Share Posted September 28, 2012 A 116mm Pro2 A brakeless specific frame A new HS33 that works properly and isn't made of plastc! A rim brake designed to run a water bleed A street-mod (20" street trials bike for adults, like Matty Turner's Inspired but with adult geo) Middleburns with a ISIS spline (I know they exsted but they are extremely hard to get hold of, due to their financial position) Excuse me now, the thought of these products of pure awesomeness has given me a raging errection. Quote Link to comment Share on other sites More sharing options...
bing Posted September 30, 2012 Author Report Share Posted September 30, 2012 Trialtech forks in 24" with rear facing 4 bolt mounts. The same for urbans, but with rear facing 4 bolt mounts as against forward facing. deffo needs to be more 24" stuff on the market, the major players must be seeing by now how much 24 is taking off, ie tyres for a start. as Sam says trialtech would make a killing if they did 24 forks. another one I thought of was maggies with an threaded clamps, like the csc prototypes. looks well easy to adjust. one turn of the clamp, and your pad is a preset distance from the rim, and you can get both sides equal. the trolls will now say this is easy with normal clamps, but for newbies I think it's a good idea 1 Quote Link to comment Share on other sites More sharing options...
hypermobilty Posted September 30, 2012 Report Share Posted September 30, 2012 deffo needs to be more 24" stuff on the market, the major players must be seeing by now how much 24 is taking off, ie tyres for a start. as Sam says trialtech would make a killing if they did 24 forks. another one I thought of was maggies with an threaded clamps, like the csc prototypes. looks well easy to adjust. one turn of the clamp, and your pad is a preset distance from the rim, and you can get both sides equal. the trolls will now say this is easy with normal clamps, but for newbies I think it's a good idea Good idea I spent an hour sorting mine out and there still not how I want Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.