clerictgm Posted August 8, 2012 Report Share Posted August 8, 2012 http://www.youtube.com/watch?v=AvGU-EFpkhI Quote Link to comment Share on other sites More sharing options...
Jake. Posted August 8, 2012 Report Share Posted August 8, 2012 It's the front freewheel moving slightly. Quote Link to comment Share on other sites More sharing options...
Blake Posted August 8, 2012 Report Share Posted August 8, 2012 Completely normal, every freewheel does it, lots of people will have different reasons but it is a mixture of many things. Nothing to worry about Quote Link to comment Share on other sites More sharing options...
5h1z1k Posted August 8, 2012 Report Share Posted August 8, 2012 not the worst situation Quote Link to comment Share on other sites More sharing options...
dezmtber Posted August 8, 2012 Report Share Posted August 8, 2012 small inacuracies in the fitment of the crank and freewheel cause this i some occasions bent axles on either the hub or cranks also make this happen its realy common on square taper bottom brackets Quote Link to comment Share on other sites More sharing options...
trials hoe Posted August 8, 2012 Report Share Posted August 8, 2012 i always put this down to the threaded section not being manufactured concentric to the bb axle hole, make a spoke tensioner if it bothers you too much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.