pashley-phil Posted May 22, 2012 Report Share Posted May 22, 2012 Can anyone tell me the spoke length I need to build a try-all H 135 32 hole hub on to a try-all hole nowar rim Many thanks, Phil Quote Link to comment Share on other sites More sharing options...
aener Posted May 22, 2012 Report Share Posted May 22, 2012 (edited) Can't find any listings of NoWar Hole rims, but with the Sky rims which I'd wager are very similar you want 268's. That's 3x on both sides. A 2x makes it 260, 1x = 255, and radial = 253. I know that's not any real help since the rim might be different - but still Edit: Hub is 44mm flanges, and 44mm flange-to-centres. To save you the tremendous effort of looking, that was using an ERD of 594 and offset of 11 (reducing the flange-to-centres to 33 each side) here: http://www.dtswiss.com/SpokesCalc/Calculator.aspx Edited May 22, 2012 by aener Quote Link to comment Share on other sites More sharing options...
Andeee Posted May 22, 2012 Report Share Posted May 22, 2012 Just to be more sure. If you actually do have the parts and some verniers. Quote Link to comment Share on other sites More sharing options...
pashley-phil Posted May 23, 2012 Author Report Share Posted May 23, 2012 That's brilliant, Basically I'm building a wheel and every other spoke on the drive side and non drive side seem to long and are sticking through the rim. Any ideas Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted May 23, 2012 Report Share Posted May 23, 2012 Laced up wrong, one side is one hole offset from the other. Best bet is start again unfortunately! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.