Jump to content

The Car Thread


MadManMike

Recommended Posts

So I got a new battery today, fitted it, cleared my engine codes and all is well.

Apart from the red battery light is permanently on.

Any ideas?

It doesn't throw up any fault codes, it just stays on. I drove about ten miles with no issues, but obviously I don't want to carry on driving it with that light on...

Link to comment
Share on other sites

I'm not sure the previous battery did die, I changed it as a precaution. The old one had the same symptoms as this one.

I've been told it could be one of the fuses on top (Yes, I know, I should have checked...) or it could be:

"There is usually a broken wire running up the loom just behind the battery and under the air box it think it's a red wire, it goes front the multi plug from the back of the alternator and all the way to dash"

Link to comment
Share on other sites

Need some suspension advice from people who know about spring rates.

I'm currently running linear 1:1 ratio 7kgf front and 5kgf rear springs. The setup is perfect for uneven tarmac, here's how the suspension works on bumps. The ride is quite harsh on normal roads so while it might look soft on video, it's because of 1G+ cornering forces.

Need to find spring rates which will make the car bearable for driving on fields and unpaved roads, so probably similar to spring rates used on a completely stock 3 series. The problem is that stock cars have progressive springs front and rear and I'd also have to work out the suspension leverage on the rear axle since my rear setup differs from the factory one. Can this be worked out by obtaining the desired wheel frequency for such applications or is wheel frequency not what I should be looking at? I have absolutely no idea whether I should be looking at 10% softer springs or 40% softer springs. Obviously the car will be raised by a good 5-8cm.

edit: found some strange info. 7kgf = approx. 400lb/in. Eibach Pro Kit springs are 148lb/in. Want the car to be softer than on the Eibach springs, so need to reduce the spring rate 3 (!!!) times?

Edited by Greetings
Link to comment
Share on other sites

20140426_174316_zps48592289.jpg

URL=http://s1291.photobucket.com/user/anderooney/media/Mobile%20Uploads/20140614_165036_zpsfac96869.jpg.html]20140614_165036_zpsfac96869.jpg

Got this as my first car back on march. 57 plate fiesta zetec s 1.6

its totaly standerd at the minute but thinking of

exhaust

smooth wipers

colour code door bumps

perhaps side skirt sticker if I colour code

what do you guys think

Edited by Rowlly21
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...