CalRobbo341 Posted March 26, 2012 Report Share Posted March 26, 2012 This has been like this since I got my trialtech's, the fork steerer has been cut and alos at an angle (sloped stem's) Was just wondering if like I could put spacers on the bolt as I am obviously over tightening as the top bolt on the stem is touching no fork steerer. Thanks Quote Link to comment Share on other sites More sharing options...
TROYston Posted March 26, 2012 Report Share Posted March 26, 2012 So long the star is flat in the forks, which i would imagine it would be, there should be no problem. Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted March 26, 2012 Report Share Posted March 26, 2012 Looks a bit dodgy to me but there's not a lot you can do about it really... Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted March 26, 2012 Report Share Posted March 26, 2012 Either longer steerer'd forks, or a sloping top cap stem are your only real options. Mines setup a bit like this, seems alright to me. Could always grind down a washer and put it between the top bolt clamp to stop it closing so much? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.