LordAssworthMcThor Posted March 13, 2012 Report Share Posted March 13, 2012 (edited) I'm not sure which to buy. I've got an Onza T-Raptor, and it had the standard onza quick release on the back. It measures 184mm from one end to the center of the quick release, 167 from end to the quick release nut thing, might be a bit stretched seeing as I snapped it by overtightening/the nut slipping into the tensioner hole. And about 4mm diameter. Wouldn't mind switching to a nut axle, any suggestions? Cheers. Edit: I think I might mean rear skewer... Edited March 13, 2012 by LordAssworthMcThor Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted March 16, 2012 Report Share Posted March 16, 2012 Im going to assume you've got the standard Onza half phat/full phat wheels that come ona t-raptor... in that case you just need to go to a bike shop and get a threaded axle and cone spanners and switch it over If you post up some pictures ill be able to give you some more advice . Cheers, Alex Quote Link to comment Share on other sites More sharing options...
LordAssworthMcThor Posted March 16, 2012 Author Report Share Posted March 16, 2012 After a bit of trawling I found one long enough, a really crappy one on ebay which cost £3. It's doing the job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.