Joshm1991 Posted February 20, 2012 Report Share Posted February 20, 2012 (edited) Hello again everyone!! My bottom bracket on the T-Poo is making some wiiierrd noises under pressure and even somtimes just rolling along!! :/ I know I put an old one in when I built the bike up but it seemed in relativly good condition but it seems to have gone downhill a bit since then!! I don't really want to take the old one out yet untill I've bought the new one so I can just make it a straight swap!! What I'm trying to work out is what length axle BB I need to get?? Stupid me didn't measure the one thats in before I fitted it!! So if anybody has put a BB in a T-Pro frame any time recently or just happens to know what would work, lemme know!! Thanks peeps!! Joosh Edited February 20, 2012 by Joshm1991 Quote Link to comment Share on other sites More sharing options...
Blake Posted February 20, 2012 Report Share Posted February 20, 2012 I think mine was a 128mm? Do you run FFW? Quote Link to comment Share on other sites More sharing options...
Joshm1991 Posted February 21, 2012 Author Report Share Posted February 21, 2012 I think mine was a 128mm? Do you run FFW? Ahh okay!! Nice one!! And yeah I've got a Try-all 108.9 on so it's quite a slim freewheel!! Cheers Joosh Quote Link to comment Share on other sites More sharing options...
Blake Posted February 21, 2012 Report Share Posted February 21, 2012 yeah I ran a 127.5mm to be precise Works great, 68mm shell width too. Quote Link to comment Share on other sites More sharing options...
Joshm1991 Posted February 21, 2012 Author Report Share Posted February 21, 2012 yeah I ran a 127.5mm to be precise Works great, 68mm shell width too. Sweet!! Thats cleared that up for me!! Just out of curiosity, this would work right?? LINKY!! Thanks again bud!! Joosh Quote Link to comment Share on other sites More sharing options...
ghostrider88 Posted February 21, 2012 Report Share Posted February 21, 2012 If you have square taper cranks,then yes. Quote Link to comment Share on other sites More sharing options...
Joshm1991 Posted February 21, 2012 Author Report Share Posted February 21, 2012 If you have square taper cranks,then yes. Yeah I do!! Never really been fussed to upgrade or owt!! Thats me sorted then!! Thanks a bunch guys!! Joosh Quote Link to comment Share on other sites More sharing options...
Blake Posted February 21, 2012 Report Share Posted February 21, 2012 Yeah the Neon should work great mate. Nice and lightweight too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.