TommyBrew Posted February 5, 2012 Report Share Posted February 5, 2012 Tried fitting some Tnn backed pads to my echo brake today and although they fit inside the cylinder sleeves, it wouldn't push onto the little knobbly bit and stay on. Will I have to get a smaller Inside diameter o-ring for the backing?!. The only thing I could do was remove the oring but they'll just fall straight off obviously, Any suggestions?!. Thanks, tom Quote Link to comment Share on other sites More sharing options...
ghostrider88 Posted February 5, 2012 Report Share Posted February 5, 2012 Just lube the o ring a little bit and you´re gonna be fine. 1 Quote Link to comment Share on other sites More sharing options...
TommyBrew Posted February 5, 2012 Author Report Share Posted February 5, 2012 I've actually just read this just before looking back to see of anyone replied! Thanks, I was trying this morning and it just seemed like it wasn't guna have it, but thanks anyway I feel more confident now haha Quote Link to comment Share on other sites More sharing options...
Le @ Tnn Engineering Posted February 6, 2012 Report Share Posted February 6, 2012 Sometimes they can be tight first time you fit them. What I do is install the brake on bike as normal but o-ring not in the slave cylinder yet. Tighten all the clamps and squeeze your brake the force of the brake pushing the pad onto the rim will get the o-ring on the slave cylinders no worries. Quote Link to comment Share on other sites More sharing options...
TommyBrew Posted February 6, 2012 Author Report Share Posted February 6, 2012 Okay then buddy thanks for the Info, Just didn't want to snap anything!. Having just got back into trials again I wasn't upto date with all the new buys and bobs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.