cunny12345 Posted January 3, 2012 Report Share Posted January 3, 2012 (edited) Hi guys, the problem i have is that when i fit my old forks (echo's) not quite sure what its called but i put the rubber/plastic bit in the top which has two diffirent diameters for one part of it that goes between the fork and the headset to stop it moving around, i put that on my trialtechs, the top is then fine but the bottom of the fork seems to have a gap and is able to move around, it seems that the whole fork tube on the trialtech has the same diameter but on the echo the tube goes slightly bigger at the bottom so it gives it a more secure fit and stops it from moving, anyone got any suggestions on what to do to be able to stop the movement/free play on my trialtechs? is there any plastic bit/washer i can buy to stop this? Matt. Sorry if its not that clear. . Edited January 3, 2012 by cunny12345 Quote Link to comment Share on other sites More sharing options...
davidbarr Posted January 3, 2012 Report Share Posted January 3, 2012 Is it still able to move about when your forks are in the frame and the stem and top cap are bolted on? Quote Link to comment Share on other sites More sharing options...
cunny12345 Posted January 3, 2012 Author Report Share Posted January 3, 2012 Is it still able to move about when your forks are in the frame and the stem and top cap are bolted on? i will try this again tomorrow as my dad has got my forks at the momant Quote Link to comment Share on other sites More sharing options...
cunny12345 Posted January 5, 2012 Author Report Share Posted January 5, 2012 i have tried it today, everything bolted together and still at the bottom of the fork it still wabbles anybody got any suggestions on what to do? Matt. Quote Link to comment Share on other sites More sharing options...
Matt Vandart Posted January 5, 2012 Report Share Posted January 5, 2012 check this: Klick me Quote Link to comment Share on other sites More sharing options...
cunny12345 Posted January 5, 2012 Author Report Share Posted January 5, 2012 sorted now matt! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.