Jon E Cash Posted July 28, 2011 Report Share Posted July 28, 2011 (edited) I did a search but couldn't find any info. I need to attach a hope trial rear disc brake to a Zoo! Lynx frame and I'm not sure which bolts I need to mount the calliper on the frame. I think it's either m6x20 or the m6x18? Does anyone know? Thanks Edit: Just realised I spelt it break Edited July 28, 2011 by Jon E Cash Quote Link to comment Share on other sites More sharing options...
nztrials Posted July 29, 2011 Report Share Posted July 29, 2011 I did a search but couldn't find any info. I need to attach a hope trial rear disc brake to a Zoo! Lynx frame and I'm not sure which bolts I need to mount the calliper on the frame. I think it's either m6x20 or the m6x18? Does anyone know? Thanks Edit: Just realised I spelt it break I used m6x18 on the rear of my echo 24 urban, worst comes to it, get the m6x20 the trial fit them for clearance when they arrive and if they are too long, file them to suit. Saves getting m6x18 and them being too short. Or you could measure the width of your disc mount and of the threaded part of your caliper then allow for any washers you may need. and this will give you the minimum required shank length. M6x18 should fit unless you have mega thick disc tabs Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted July 29, 2011 Report Share Posted July 29, 2011 ZOO has thick disc tabs, so I would go with 20s, can always fit a washer under the heads or trim down Quote Link to comment Share on other sites More sharing options...
Jon E Cash Posted July 29, 2011 Author Report Share Posted July 29, 2011 Thanks for the advice. Ordered some from tarty bikes this morning Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.