jacksnell95 Posted July 15, 2011 Report Share Posted July 15, 2011 (edited) yeh rounded the allen key bolt, tried the star shaped thing that didn't work tried to cut it and that didn't work help me!? (sorry for the huge picture) to close to frame to cut off Edited July 15, 2011 by jacksnell95 Quote Link to comment Share on other sites More sharing options...
SamKidney Posted July 15, 2011 Report Share Posted July 15, 2011 Cut it off :/ Rest of the bolt will wind out then. New bolt, new washer, done . Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 15, 2011 Author Report Share Posted July 15, 2011 Cut it off :/ Rest of the bolt will wind out then. New bolt, new washer, done . yeh but its like uber tight on the frame :/ how would i cut it off Quote Link to comment Share on other sites More sharing options...
SamKidney Posted July 15, 2011 Report Share Posted July 15, 2011 yeh but its like uber tight on the frame :/ how would i cut it off Grinder. Being very very carefull. Ive done it. 2 Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 15, 2011 Author Report Share Posted July 15, 2011 Grinder. Being very very carefull. Ive done it. im not trusted with a grinder... -.- 2 Quote Link to comment Share on other sites More sharing options...
Kieran Morrison Posted July 15, 2011 Report Share Posted July 15, 2011 Try cut the back bit surrounding the bolt (not sure what its called :$) and when thats off use a spanner or something to twist it out Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 15, 2011 Author Report Share Posted July 15, 2011 thats just a washer that the bolt pushes into the frame to hold the wheel in turning that will do sh*t all :/ Quote Link to comment Share on other sites More sharing options...
old'scoolfool Posted July 15, 2011 Report Share Posted July 15, 2011 thats just a washer that the bolt pushes into the frame to hold the wheel in turning that will do sh*t all :/ where you've cut the two slots get a metal ruler or something and use it as a massive screw head if that makes any sense at all probably not lol 1 Quote Link to comment Share on other sites More sharing options...
Rockman Posted July 15, 2011 Report Share Posted July 15, 2011 where you've cut the two slots get a metal ruler or something and use it as a massive screw head if that makes any sense at all probably not lol Or maybe the side of a chisel so it has less flex. Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 15, 2011 Author Report Share Posted July 15, 2011 im going round my friends tomorrow so hopefully he can get it other otherwise lots of swearing is going to be involved Quote Link to comment Share on other sites More sharing options...
dann2707 Posted July 15, 2011 Report Share Posted July 15, 2011 Cut the black bit off with a hacksaw and get some molegrips on the bolt. Quote Link to comment Share on other sites More sharing options...
liam n Posted July 15, 2011 Report Share Posted July 15, 2011 or go to your local ally welder and get him to weld a metal rod to the bolt and get some vice grips on the end of it....i did it with a stuck cranks bolt, and the welder welded a nut onto the bolt and i now have a nice crank bolt Quote Link to comment Share on other sites More sharing options...
Pete.M Posted July 15, 2011 Report Share Posted July 15, 2011 Lots of penetrating fluid and a big muscley guy. Worked for me anyway. But seriously get some WD-40 or something on it tonight and again tomorrow before attempting to get it off again. Quote Link to comment Share on other sites More sharing options...
BurlyBox Posted July 16, 2011 Report Share Posted July 16, 2011 (edited) never mind someone already said my idea Edited July 16, 2011 by BurlyBox Quote Link to comment Share on other sites More sharing options...
24martin Posted July 16, 2011 Report Share Posted July 16, 2011 get a 4mm drill bit and drill into the bolt a good 3quarters of a centimetre, once you've done that get a t25 torx bit and hammer it into the hole you drilled (hammer the shit out of it and make sure its right in there), then simply undo the bolt! i do this most days at work on customers bike's and it works a treat! obviously replace the bolt afterwards 1 Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 16, 2011 Author Report Share Posted July 16, 2011 get a 4mm drill bit and drill into the bolt a good 3quarters of a centimetre, once you've done that get a t25 torx bit and hammer it into the hole you drilled (hammer the shit out of it and make sure its right in there), then simply undo the bolt! i do this most days at work on customers bike's and it works a treat! obviously replace the bolt afterwards ok that sounds the best idea thnx Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted July 16, 2011 Report Share Posted July 16, 2011 Drill the head of the bolt off with a 6mm drill bit. remove the rest of the bolt with mole grips. Try an easy-out ( google it ) or screw extractor. Quote Link to comment Share on other sites More sharing options...
Kieran Morrison Posted July 16, 2011 Report Share Posted July 16, 2011 thats just a washer that the bolt pushes into the frame to hold the wheel in turning that will do sh*t all :/ Cut the washer off, and turn the bolt. Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 16, 2011 Report Share Posted July 16, 2011 Drill down the bolt, 6 or 6.5mm, the head will pop off Quote Link to comment Share on other sites More sharing options...
theom Posted July 19, 2011 Report Share Posted July 19, 2011 Drill down the bolt, 6 or 6.5mm, the head will pop off This. Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 19, 2011 Author Report Share Posted July 19, 2011 my stepdad been a useless c*nt but iven agged him so much im gna do it tonight Quote Link to comment Share on other sites More sharing options...
edwards 99 Posted July 19, 2011 Report Share Posted July 19, 2011 UNLUCKY :giggle: Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 19, 2011 Author Report Share Posted July 19, 2011 UNLUCKY :giggle: piss off you little fanny Quote Link to comment Share on other sites More sharing options...
edwards 99 Posted July 19, 2011 Report Share Posted July 19, 2011 piss off you little fanny [iv got a chain saw u can borrow if you want Quote Link to comment Share on other sites More sharing options...
jacksnell95 Posted July 19, 2011 Author Report Share Posted July 19, 2011 ha :L nd im going to sort it 2moz nd eoghan's lending me a chain Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.