Canadianbiker Posted May 1, 2011 Report Share Posted May 1, 2011 my buddie gave me his old bmx and the seat post is rusted into the frame and need to get it out for a seat/post combo Quote Link to comment Share on other sites More sharing options...
ForrestDump Posted May 1, 2011 Report Share Posted May 1, 2011 My friend had this problem with his jump bike, first plan was to take the seat off and clamp the post in a vice and twist the frame but we didn’t have enough room, therefore, depending on what your clamp on the seat post, we swapped the seat and fitted some old handle bars onto the seat post using the clamp, we then gave it a spray with some WD40 where the post goes into the frame, my friend held the bike and I just twisted the bars like a giant cork screw and pulled up at the same time, took quite a bit of effort but we got it out in the end, I suggest next time when you fit your next seat post that you clean out the seat tube and grease up your new post, that will make it a hell of a lot easier next time. Quote Link to comment Share on other sites More sharing options...
DeVal Posted May 1, 2011 Report Share Posted May 1, 2011 use a very large hammer and a lump of wood!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.