Lynas13 Posted April 14, 2011 Report Share Posted April 14, 2011 Hi all. Today i recived my new manus 2 frame and transfered all my existing parts onto the new frame. Unfortunatly the cranks catch the frame slightly whilst riding so I stuck a sticker over it but that riped quickly. Is their a way to stop this without buying new cranks as at the moment im moneyless. Thanks in advance. Jack Quote Link to comment Share on other sites More sharing options...
LukasMcNeal Posted April 14, 2011 Report Share Posted April 14, 2011 Longer BB 1 Quote Link to comment Share on other sites More sharing options...
Sam T Posted April 14, 2011 Report Share Posted April 14, 2011 Longer BB Quote Link to comment Share on other sites More sharing options...
Lynas13 Posted April 14, 2011 Author Report Share Posted April 14, 2011 Will change cranks, bottom bracket and freewheel at christmas. Just need a solution till then. Quote Link to comment Share on other sites More sharing options...
Rob. Posted April 14, 2011 Report Share Posted April 14, 2011 Will change cranks, bottom bracket and freewheel at christmas. Just need a solution till then. BB spacer , i had this problem when i had a manus , mine catched with tryall isis cranks and monty 221ti cranks Quote Link to comment Share on other sites More sharing options...
craigjames Posted April 14, 2011 Report Share Posted April 14, 2011 Longer BB , it's the only method really. What cranks and bb do you have at the moment, if you're using ISIS you could use a BB axle spacer to give you a little more clearance, but it's only a very small amount. Quote Link to comment Share on other sites More sharing options...
koxxboy14 Posted April 14, 2011 Report Share Posted April 14, 2011 Did'nt know you were getting a new frame Jack. you riding barrow at the weekend and testing it out? Quote Link to comment Share on other sites More sharing options...
Lynas13 Posted April 14, 2011 Author Report Share Posted April 14, 2011 At the moment i really cant afford a new bb but will filing off some of the crank work Quote Link to comment Share on other sites More sharing options...
craigjames Posted April 14, 2011 Report Share Posted April 14, 2011 At the moment i really cant afford a new bb but will filing off some of the crank work Yeah it would, but bear in mind you stand on the cranks so dont go removing too much! Quote Link to comment Share on other sites More sharing options...
Manus-Rider Posted April 14, 2011 Report Share Posted April 14, 2011 Alot of people have this problem with the manus, i had it with my manus, bought new cranks with a larger ofset. You could yous this method, slightly grind the back off your cranks ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.