MPfive Posted April 13, 2011 Report Share Posted April 13, 2011 (edited) Im running HS33's and would like to fit a booster.Do you have to put a spacer on the bolts between the brake clamp and the booster or is it OK to just bolt it straight onto the clamp? Edited April 13, 2011 by MPfive Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted April 13, 2011 Report Share Posted April 13, 2011 It depends on the booster. Is it a 4 bolt or 2 bolt booster you have? Usually you use spacers between the clamps on the booster but it depends on the setup. Quote Link to comment Share on other sites More sharing options...
MPfive Posted April 13, 2011 Author Report Share Posted April 13, 2011 Its a 2 bolt revell booster and I've got echo maggy mounts. Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted April 13, 2011 Report Share Posted April 13, 2011 Ideally, because the clamps are partly counter-bored for the screw heads, you'd be better running spacer tubes. You could go straight into the clamps but you might end up deforming the clamps as there isn't really a mating face to clamp onto. If you do go without spacers try and get some slightly longer screws to reduce the likelihood of stripping the brake mount. Quote Link to comment Share on other sites More sharing options...
MPfive Posted April 13, 2011 Author Report Share Posted April 13, 2011 Nice one,Thanks for the quick reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.