howvard Posted June 24, 2011 Author Report Share Posted June 24, 2011 i have about 35 - 40 PSI on a 26" but i've just started and so im not very smooth and ive had a couple of pinch flats so im desperately trying to avoid having to fit punctures but i thnk ive got my pressure alright now. this is good presssure mate since i first posted this up i have progressed alot and very much enjoy this tyre pressure. It gives a good hold when your dropping onto stuff, and isnt to hard so that you cant push down onto the tyre for extra bounce. Quote Link to comment Share on other sites More sharing options...
BurlyBox Posted June 25, 2011 Report Share Posted June 25, 2011 this is good presssure mate since i first posted this up i have progressed alot and very much enjoy this tyre pressure. It gives a good hold when your dropping onto stuff, and isnt to hard so that you cant push down onto the tyre for extra bounce. cool. i cant really do much stuff that really tests the pressure properly but it felt good to me and its good to hear from someone else too Quote Link to comment Share on other sites More sharing options...
Tioz Posted June 28, 2011 Report Share Posted June 28, 2011 i have about 35 - 40 PSI on a 26" but i've just started and so im not very smooth and ive had a couple of pinch flats so im desperately trying to avoid having to fit punctures but i thnk ive got my pressure alright now. I tried 30PSI yesterday and felt as hard as a rock I'd say I'm about 20 on my 26" now Quote Link to comment Share on other sites More sharing options...
BurlyBox Posted June 28, 2011 Report Share Posted June 28, 2011 it may feel as hard as a rick but it will go pretty flat if you land on the edge of something. i tried getting up something and the back wheel slammed in to the edge of the wall and i got a pinch flat and theyre horrible to repair because theyre so close to each other... i know ive had 3 pinch flats already. Quote Link to comment Share on other sites More sharing options...
onza tpro Posted June 28, 2011 Report Share Posted June 28, 2011 I'm running 30psi on the rear and 28psi up front.I know it's a bit specific but I like it that way Quote Link to comment Share on other sites More sharing options...
Pete.M Posted June 28, 2011 Report Share Posted June 28, 2011 I've been keeping my High Rollers at around 30psi but I plan on testing higher pressures, just having to get used to the solidity of the High Rollers. I was previously used to Schwalbe Table Tops (fitted to my jump bike). They have a lot more bounce and give and also much much less rolling resistance, I hate having to cycle long distances on the High Rollers. Also still getting used to having no suspension, my bony body is taking a beating but it's all part of improving I guess. Quote Link to comment Share on other sites More sharing options...
howvard Posted June 28, 2011 Author Report Share Posted June 28, 2011 I've been keeping my High Rollers at around 30psi but I plan on testing higher pressures, just having to get used to the solidity of the High Rollers. I was previously used to Schwalbe Table Tops (fitted to my jump bike). They have a lot more bounce and give and also much much less rolling resistance, I hate having to cycle long distances on the High Rollers. Also still getting used to having no suspension, my bony body is taking a beating but it's all part of improving I guess. It really is mate, you've got to take a good beating (if your not bailing then your not trying hard enough) Quote Link to comment Share on other sites More sharing options...
howvard Posted March 13, 2012 Author Report Share Posted March 13, 2012 BUMPING this up to see how things are these days with the street style new on the blocks. Tyre pressure change?? Or not?? Whattcha runnin Quote Link to comment Share on other sites More sharing options...
dezmtber Posted March 13, 2012 Report Share Posted March 13, 2012 i run 18-20 psi rear using maxxis creepy crawler and 25 psi front creepy crwaler, and using tubelessno punches and i only get a little burp now and again on harsh landings i weigh 11.4 stone 5f 6" Quote Link to comment Share on other sites More sharing options...
Skoze Posted March 13, 2012 Report Share Posted March 13, 2012 50psi, Holy Rollers. Weigh about 12 stone, hoppy hoppy isn't too much fun but for everything else it's a beaut. Quote Link to comment Share on other sites More sharing options...
alistair14 Posted March 13, 2012 Report Share Posted March 13, 2012 holy roller front - 20psi rear old school monty - around 30 Quote Link to comment Share on other sites More sharing options...
dezmtber Posted March 14, 2012 Report Share Posted March 14, 2012 i rode some planters last night and had to up the pressure just above 25psi in the rear and 30 front Quote Link to comment Share on other sites More sharing options...
FamilyBiker Posted March 16, 2012 Report Share Posted March 16, 2012 I am using maxxis holy rollers and run around 50psi, may try harder as I still rim out when hitting stair bumps. this. Quote Link to comment Share on other sites More sharing options...
Cap Posted March 16, 2012 Report Share Posted March 16, 2012 High roller single ply rear 25ish Try all sticky front 20ish Quote Link to comment Share on other sites More sharing options...
TROYston Posted March 17, 2012 Report Share Posted March 17, 2012 Trials: f=30 r=20 Try all Stickys BMX: f=80 r=75 Eclat ESC Race BMX: f=110 Intense Micro Knobbly MK1 r=125 Maxxis DTH Quote Link to comment Share on other sites More sharing options...
Alex Dark Posted March 26, 2012 Report Share Posted March 26, 2012 On my zhi stock, 18-20 front and rear, try-all stiky up front and stiky lite rear. I weight 9st 11lbs Quote Link to comment Share on other sites More sharing options...
JD™ Posted March 26, 2012 Report Share Posted March 26, 2012 For most of yesterday I ran 0psi in the rear and about 35-40 in the front. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.