Echo Sl Freewheel On Rockman Cranks.

[Canardweb]

Hello everybody,

I intend to change some parts on the bike, and this includes cranks and freewheel. So I decided to go for the RockMan Lite Cranks. The thing is, I want to use an Echo SL 108 freewheel and I think I remember there was some problems fitting that frontwheel on these cranks. I might be wrong, but I think there was a thread about that problem. If someone can confirm it would be appreciated.

Cheers

Edited February 23, 2011 by Canardweb

[Jamie_Trials]

Not sure what the problem could be, in fact. The overall thickness of the Rockman freewheel its self is thicker than the SL

[J.KYDD]

I'm running the rockman lite cranks, Echo sl freewheel and a trialtech bashring. You should be fine - i had no issues

[smithy83]

I'm running the rockman lite cranks, Echo sl freewheel and a trialtech bashring. You should be fine - i had no issues

it will fit mate ,i was running same setup but with the titanium tt bash ring.freewheel may be fairly hard to screw on but just put plenty of lube on crank threads and youl have no probs.iv had two sets of rockman cranks and only had the tight thread issue with one set.

[Maxx]

I think Rockman freewheel have also a problem because on Try-all cranks I couldn't screw my freewheel whereas others freewheels fit perfectly with Try-all cranks (try-all, echo, ...).