Andeee Posted February 20, 2011 Report Share Posted February 20, 2011 Howdyyyy Recently bought a cloud 9 bash rode with it fitted properly today.... after a while i noticed a slight creaking sound to look at my b.b area to see all of the cloud 9 bolts were pretty much nearly loose... so i tightened them up as tight as possible... same problem again.... -.- My only concern on resolving this is maybe putting some threadlock onto the bolts? Has anyone come across this problem before? Quote Link to comment Share on other sites More sharing options...
forteh Posted February 21, 2011 Report Share Posted February 21, 2011 Im pretty sure steve states in the installation guide that loctite should be used on the sprocket screws, might be worth a check on the HSB website to see if the info is up there. I loctited mine and never had an issue with it Quote Link to comment Share on other sites More sharing options...
Andeee Posted February 23, 2011 Author Report Share Posted February 23, 2011 ? Quote Link to comment Share on other sites More sharing options...
Heatsink Posted February 23, 2011 Report Share Posted February 23, 2011 Hi Andy, As Ed says, the bolts should have "Threadlock" added to them before you screw them in, and the same goes for the lockring. The general purpose threadlock used in most bike applications will be fine. Check out the installation instructions here. This document is also linked at the top of the Cloud9 bashkit page of the HeatsinkBikes website I hope the Cloud9 is impressing and revitalising your Middleburns! Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.