Matt24. Posted January 27, 2011 Report Share Posted January 27, 2011 I have bought said goodridge hose and kit designed to work together to run braided hosing. Every time I have a go at fitting it though, it just wont seal properly between the fitting kit and cable, has anyone who has fitted this got any tips or any advice of how to do it well. I am getting rather frustrated about it and just want it running so it doesnt leak.... p.s. anywhere no on the high street where i can get a spare magura bleeding syringe i.e. something the same size but not from a bike shop... Quote Link to comment Share on other sites More sharing options...
HayersToby Posted January 27, 2011 Report Share Posted January 27, 2011 Chemist, Vet, School. Just show or explain Sharp knife and do it slowly. I found it was hard. Cut, file, trim, then compress and tighen. Hope is better Quote Link to comment Share on other sites More sharing options...
casualjoe Posted January 27, 2011 Report Share Posted January 27, 2011 p.s. anywhere no on the high street where i can get a spare magura bleeding syringe i.e. something the same size but not from a bike shop... Hospitals do em Quote Link to comment Share on other sites More sharing options...
Matt24. Posted January 27, 2011 Author Report Share Posted January 27, 2011 OK cheers guys, I can get that bit sorted now, now for the goodridge hoses, yeah i think the issue is squeezing the first parts over the cable tight enough which is what I can not do, I shall try trimming filing cutting etc any other tips massively appreciated..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.