monty221ti Posted January 6, 2011 Report Share Posted January 6, 2011 hi, I would love to run a bashring on my 221 kamel but i have try-all cranks on so it's not possible to run a bash on the cranks, were could i fit a bashring? thanks. Quote Link to comment Share on other sites More sharing options...
p_ruskin Posted January 6, 2011 Report Share Posted January 6, 2011 hi, I would love to run a bashring on my 221 kamel but i have try-all cranks on so it's not possible to run a bash on the cranks, were could i fit a bashring? thanks. You MIGHT be able to fit the TrialTech Ti bashring, Just an idea I was going to try but never got round too it. its really thin so it may fit Someone correct me if im wrong Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 6, 2011 Author Report Share Posted January 6, 2011 i dont think i can as there is just enough tread(dont know if spelled right?) for the freewheel Quote Link to comment Share on other sites More sharing options...
CalopS Posted January 6, 2011 Report Share Posted January 6, 2011 (edited) You can run one between the frame and the bb cup like this. Edited January 6, 2011 by CalopS Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 6, 2011 Author Report Share Posted January 6, 2011 You can run one between the frame and the bb cup like this. and this can not damage the frame or so? Quote Link to comment Share on other sites More sharing options...
murph82 Posted January 6, 2011 Report Share Posted January 6, 2011 I had a uci machined down to 3mm to fit on my uci tensiles with a 96 freewheel. I also wondered if it would fit between the cup and frame but would it or could it damage the cup or either thread? What length are your cranks? Am i right in thinking cranks shorter than 170 are generally for mods so dont have the thread for a bashring? Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 6, 2011 Author Report Share Posted January 6, 2011 I had a uci machined down to 3mm to fit on my uci tensiles with a 96 freewheel. I also wondered if it would fit between the cup and frame but would it or could it damage the cup or either thread? What length are your cranks? Am i right in thinking cranks shorter than 170 are generally for mods so dont have the thread for a bashring? 160mm so they don't have enough thread for bashring:( Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 6, 2011 Author Report Share Posted January 6, 2011 i have some 3mm thick plexiglass, can i make a bashring with thath, and when it's done, then make 2 other plates that i can bolt on the bashring, so it would be 3mm were it's mounted on the bb, and 9mm the other place:) if you know what i mean. Quote Link to comment Share on other sites More sharing options...
lil pads Posted January 6, 2011 Report Share Posted January 6, 2011 http://www.facebook.com/photo.php?fbid=120703664662194&set=t.100001676834197&pid=144051&id=100001676834197 this way help Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 6, 2011 Author Report Share Posted January 6, 2011 http://www.facebook.com/photo.php?fbid=120703664662194&set=t.100001676834197&pid=144051&id=100001676834197 this way help yeah, but wouldnt it make my chainline bad? do you think i could make one in plexiglass Quote Link to comment Share on other sites More sharing options...
monty221ti Posted January 7, 2011 Author Report Share Posted January 7, 2011 anyone? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.