willdudeXD Posted January 6, 2011 Report Share Posted January 6, 2011 i was tightening the clamp on the lever boy of my hs33 and it cracked and i really cant afford a new lever and bleed kit... is there a way i can fix it or stop it from moving without replacing it? even if its temporary, atm i have a cable tie keeping it from cracking more but it moves and made me slip the pedal and get 2 stitches in me shin Quote Link to comment Share on other sites More sharing options...
Theta2 Posted January 6, 2011 Report Share Posted January 6, 2011 i was tightening the clamp on the lever boy of my hs33 and it cracked and i really cant afford a new lever and bleed kit... is there a way i can fix it or stop it from moving without replacing it? even if its temporary, atm i have a cable tie keeping it from cracking more but it moves and made me slip the pedal and get 2 stitches in me shin Mine did this. I used a longer bolt from a 4 bolt mount and now it is fine Quote Link to comment Share on other sites More sharing options...
willdudeXD Posted January 6, 2011 Author Report Share Posted January 6, 2011 (edited) Mine did this. I used a longer bolt from a 4 bolt mount and now it is fine how does that work im thinking about just making the bar wider where i want the lever with hockey tape so it grips the bar, then going over it to stop it cracking more lol im thinking about trying to put it on my bmx xD EDIT: just took it off and measured against my bmx, no way is that happening lol Edited January 6, 2011 by willdudeXD Quote Link to comment Share on other sites More sharing options...
craigjames Posted January 6, 2011 Report Share Posted January 6, 2011 Where exactly has it cracked, can you get some pics up to make things a little bit easier?! If it's the clamp section that's cracked then you're generally a bit stuffed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.