CalopS Posted November 28, 2010 Report Share Posted November 28, 2010 (edited) That isn't a crack on the pedal, just dirt. I went out to the garage to check The bash ring needs resetting I think First time I've had one instead of a bash plate. Spec: Frame - Onza Comp Forks - Echo Urban Bars - Monty Grips - Trialtech Stem - Monty Headset - Echo SL Front Wheel - Try-All Hole rim, Rockman Bub Disc Hub, Sapim Spokes Rear Wheel - Try-All Reinforced Drilled rim, Rockman Bub Disc Hub, Sapim Spokes, Echo TR Sprocket Tires - Try-All Cranks - Rockman 165mm with Echo SL bolts Bashring - Trialtech Titanium half ring BB - Monty Pedals - Echo Caged 2010 Chain - Trialtech Lite Brakes - Monty/Hope Discs - Hope front/Rockman rear Loving it so far! The geo is pretty similar to the Rockman Manus I had but 10mm lower bb helps it feel less pogo like. Thanks to RocknRoll bikes for a speedy delivery on the frame! Best looking Onza comp ever? UPDATE: My lever clamps broke so Ive been running brakless for a bit. Just gave it a good clean and fitted a new rear axle ( ) I got some Echo Tr 2011 Platforms for xmas too. Best platforms I've ever used. Edited January 19, 2011 by CalopS Quote Link to comment Share on other sites More sharing options...
dann2707 Posted November 28, 2010 Report Share Posted November 28, 2010 Lush as. I'm getting the same frame soon I can't wait Where are your bash plate mounts? Quote Link to comment Share on other sites More sharing options...
Sam T Posted November 28, 2010 Report Share Posted November 28, 2010 Very nice! These frames ride so good. Quote Link to comment Share on other sites More sharing options...
Hessy Posted November 28, 2010 Report Share Posted November 28, 2010 New bike is looking good. Just a tip for the procarbon 'protector'. Put a couple of layers of foam (handlebar tape) inside it and zip tie it to the frame. I had to do this after it didn't stop a dent on my frame! See you soon Carl Jed Quote Link to comment Share on other sites More sharing options...
CalopS Posted November 28, 2010 Author Report Share Posted November 28, 2010 (edited) Where are your bash plate mounts? I cut them off because I want to do the expert (UCI) route all year in 2011 and on street using your bash plate to get up stuff is DIRTY, so having a lighter bashring just for when you mess up works for me. Thanks for thr tip Jed. See you at the xmas special! Edited November 28, 2010 by CalopS Quote Link to comment Share on other sites More sharing options...
Mark W Posted November 28, 2010 Report Share Posted November 28, 2010 The bash ring needs resetting I think First time I've had one instead of a bash plate. Bashring only = you're a winner! Nice looking bike too I had to do this after it didn't stop a dent on my frame! How hard did you hit that?! Must've been pretty savage, haha. Quote Link to comment Share on other sites More sharing options...
liam n Posted November 28, 2010 Report Share Posted November 28, 2010 (edited) That is LUSH can't wait to get my frame it's on its way now i'll post up some pics when i et it it's gunna look pretty much the same except magura rear Edited November 28, 2010 by liam n Quote Link to comment Share on other sites More sharing options...
pengsmelly Posted November 28, 2010 Report Share Posted November 28, 2010 I must say, i do like that A LOT! Quote Link to comment Share on other sites More sharing options...
liam n Posted November 28, 2010 Report Share Posted November 28, 2010 I must say, i do like that A LOT! i must say pengelly you'll be face to face with one or two of them after xmas me nd maybe elisha are gettin a comp Quote Link to comment Share on other sites More sharing options...
CalopS Posted November 28, 2010 Author Report Share Posted November 28, 2010 (edited) All the Monty parts are off a 07 Monty Ti that I used to have if anyone wondered. Thanks for the comments so far! Edited November 28, 2010 by CalopS Quote Link to comment Share on other sites More sharing options...
Rob. Posted November 28, 2010 Report Share Posted November 28, 2010 looks much better then the rockman Carl! Swish looking bike. Quote Link to comment Share on other sites More sharing options...
charliemod Posted November 28, 2010 Report Share Posted November 28, 2010 very nice, Andy beck has one now as well, ha ha. Quote Link to comment Share on other sites More sharing options...
Jon Alty Posted November 28, 2010 Report Share Posted November 28, 2010 How hard did you hit that?! Must've been pretty savage, haha. He cant remember, he was that drunk . Nice bike man, looks sweet as . Quote Link to comment Share on other sites More sharing options...
Guest Posted November 28, 2010 Report Share Posted November 28, 2010 does look lidy that Quote Link to comment Share on other sites More sharing options...
Andrew C Posted November 29, 2010 Report Share Posted November 29, 2010 Best looking Onza comp ever? YES!!! Quote Link to comment Share on other sites More sharing options...
Skoze Posted November 29, 2010 Report Share Posted November 29, 2010 Mods usually do nothing for me, but that's a stunner! Nice work dude. Quote Link to comment Share on other sites More sharing options...
liam n Posted November 29, 2010 Report Share Posted November 29, 2010 where did you get the down tube protector? Quote Link to comment Share on other sites More sharing options...
CalopS Posted November 29, 2010 Author Report Share Posted November 29, 2010 where did you get the down tube protector? Tarty Quote Link to comment Share on other sites More sharing options...
Nick Manning Posted November 29, 2010 Report Share Posted November 29, 2010 Looks really nice mate. Hows it ride compared to the Rockman? Quote Link to comment Share on other sites More sharing options...
liam n Posted November 29, 2010 Report Share Posted November 29, 2010 Tarty thanks Quote Link to comment Share on other sites More sharing options...
aener Posted November 29, 2010 Report Share Posted November 29, 2010 Congratulations on your perfect bike. That bar/stem/frame geometry combination is the absolute king. Quote Link to comment Share on other sites More sharing options...
Zoo!Man Posted November 29, 2010 Report Share Posted November 29, 2010 I actually like that bike. I'd say it's a smart-built bike - you saved weight in parts you can safety do it, and you've got other parts a little bit heavier that will rest a lot. Furthermore, it's really cool. Great! Quote Link to comment Share on other sites More sharing options...
Luke Dunstan Posted November 29, 2010 Report Share Posted November 29, 2010 She's a looker! Quote Link to comment Share on other sites More sharing options...
CalopS Posted November 29, 2010 Author Report Share Posted November 29, 2010 Looks really nice mate. Hows it ride compared to the Rockman? Onza Comp Wheelbase: 1000mm Chainstay Length: 350mm BB Rise: 70mm Head Angle: 72 degrees Centre of BB shell to top centre of head tube: 590mm (23.23") Rockman Manus Wheelbase: 1005mm Chainstay Length: 350mm BB Rise: +80mm Head Angle: 71.5 degrees Centre of BB shell to top centre of head tube: 605mm (23.5") Well as you can see the difference in geo is minimal so I got used to it very fast! It feels less pogo like and more stable because of the lower BB but theres a bit less cockpit room for gaps and stuff. Ive only ridden it once but my friend said Im riding the onza better. Only a couple more rides will tell. Im hopeing the snow dies down a bit soon so I can get to some natural! Thanks for the comments everyone! Quote Link to comment Share on other sites More sharing options...
AndyZoo Posted December 2, 2010 Report Share Posted December 2, 2010 very nice, Andy beck has one now as well, ha ha. Yes I sure do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.