wonganut Posted October 25, 2010 Report Share Posted October 25, 2010 the bolt in my crank has rounded off and as its for cranks its quite tight what can i do ? Thanks Quote Link to comment Share on other sites More sharing options...
N.Wood Posted October 25, 2010 Report Share Posted October 25, 2010 Hammer in a torx bit, superglue/weld an allenkey in there, cut a slot in it so you can get a screwdriver in there (may not be enough torque), grind edges so you can get a spanner over it (may not be enough space), use an EZ out thang. Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted October 25, 2010 Report Share Posted October 25, 2010 the bolt in my crank has rounded off and as its for cranks its quite tight what can i do ? Thanks Are the cranks tight? Is there a reason to undo it? If the cranks are tight and you're not swapping them in a hurry, bollocks to it, leave it in. Otherwise do as above at the sacrifice of a few quid of an allen key, its cheaper than a new frame if you get it wrong.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.