isitafox Posted September 21, 2010 Report Share Posted September 21, 2010 I'm looking at getting some new tyres for my control as I'm still running my old irc's from years back. The problem is the kujo on the rear looks quite tight in the frame and thats only a 2.35 whereas I'm thinking of getting the try all stiky for the rear which is a 2.5. I know tartybikes has an image showing the measurements of the tyres width and height but thats on a 47mm rim and mines only a 44mm so I'm not sure how far out the measurements would be on my rim. Any advice?? And before people say get a conti the reason I'm after some try alls is cause of the cheap offer tartys has on them! Quote Link to comment Share on other sites More sharing options...
Matt Burrows Posted September 21, 2010 Report Share Posted September 21, 2010 Should be more than enough room for a 2.5" in your control Quote Link to comment Share on other sites More sharing options...
Mark W Posted September 21, 2010 Report Share Posted September 21, 2010 I know tartybikes has an image showing the measurements of the tyres width and height but thats on a 47mm rim and mines only a 44mm so I'm not sure how far out the measurements would be on my rim. Should be about 2mm difference or so (narrower, obviously). Probably less... Quote Link to comment Share on other sites More sharing options...
isitafox Posted September 21, 2010 Author Report Share Posted September 21, 2010 Will have to have a measure up when I get home in the morning then, will have to find some other parts to swap in order to make up for the massive weight of the rear as well!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.