Kenny--Trials Posted August 14, 2010 Report Share Posted August 14, 2010 Hi guys, My 04 magura tpa has been broken for a while now but i didnt think it was possible to replace untill someone told me it could be replaced with a bolt. How would this be done?? Thanks Quote Link to comment Share on other sites More sharing options...
foxinsocks Posted August 15, 2010 Report Share Posted August 15, 2010 Could use that tip myself... been looking for a '04 TPA bolt for a long time and they seem to have vanished from the face of the earth. time to improvise... Quote Link to comment Share on other sites More sharing options...
Dan Clark Posted August 15, 2010 Report Share Posted August 15, 2010 Take off the lever blade and the red plastic thing, then remove the bit inside the lever blade thats snapped and stick a M5 bolt through the threaded hole on the adjuster where the red bit was, job done. You can be fancy and grind a slot in it so it's the same as the old one, but it works perfectly fine as just a bolt. Quote Link to comment Share on other sites More sharing options...
Kenny--Trials Posted August 15, 2010 Author Report Share Posted August 15, 2010 Take off the lever blade and the red plastic thing, then remove the bit inside the lever blade thats snapped and stick a M5 bolt through the threaded hole on the adjuster where the red bit was, job done. You can be fancy and grind a slot in it so it's the same as the old one, but it works perfectly fine as just a bolt. It hasn't snapped its just when i try to move it left and right it doesn't work Quote Link to comment Share on other sites More sharing options...
Dan Clark Posted August 15, 2010 Report Share Posted August 15, 2010 Cross threaded then, just do the same thing. There's a tutorial in the wiki that explains it more in depth, but it's really not difficult. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.