How Original Posted July 22, 2010 Report Share Posted July 22, 2010 OK so I bought the IceToolz cassette remover, I have took out 1 bolt from each side of the bar running through the hub, I have took the cover off, and the spacers and washers and whatnot. I have put the tool in and put my full bodyweight onto it, but all its doing is clicking, I'm guessing it should be. But it won't come loose. Maybe I'm doing something wrong, but can anyone help? Quote Link to comment Share on other sites More sharing options...
Luke Rainbird Posted July 22, 2010 Report Share Posted July 22, 2010 Sounds like you've taken the hub apart?! All you need is to remove the bolts/QR skewer then use the cassette tool and a chain whip to undo it. Without the chain whip the hub just clicks through it's engagements just as it would if you were riding when you turn the cassette tool, the chain whip holds this still letting you undo the lockring Quote Link to comment Share on other sites More sharing options...
Matt Burrows Posted July 22, 2010 Report Share Posted July 22, 2010 Are you sure you actually have a cassette and not a screw on freewheel block? What hub is it? Quote Link to comment Share on other sites More sharing options...
theom Posted July 24, 2010 Report Share Posted July 24, 2010 (edited) Chain whip, check out youtube if your unsure how to use it. Edited July 24, 2010 by theom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.