laurent Posted July 20, 2010 Report Share Posted July 20, 2010 The only way you can really make it lighter is to make the carcass thinner, which would effectively end up with this tyre anyway (although with a slightly different looking tread). I guess, smaller tire means less material, so lighter tire... Morover in my opinion it is not necessary to have a tire that big...it does not give any sort of improvement. It is just heavier (as above, 'i guess') , and hard to fit in a lot of frames. Rubber queen 2.4 was yet too big. I assume if they want to sell a lot of these they have to make it compatible with most of the frames. What rubber queen 2.2 does, or now try-all light.does. But they are the professionals, so i assume they know what they do... Moreover the front tire seems quite heavy when the actual mountain king or even speedking do the job. They could have just improve the compound of one of this tires, without putting any apex inside. Thus a pair of trial king/queen is heavier ( a little bit) than a pair of try-all.... Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 20, 2010 Author Report Share Posted July 20, 2010 It depends what riding you're doing, and what sort of terrain you ride. If you're riding more challenging, off camber type of objects then a wider tyre can help. The inserts and compound on the front wheel are created to try and slow down the rebound of the front tyre and make it more stable than other lighter tyres. I've heard Stan and Ali mention before that with certain super light tyres they just get bounced off rocks and so on, so the aim of these tyres is to try and 'calm' them down, almost. It also provides a bit more pinch protection if you're going to more jagged rocks and so on. The grip is also on a different level to the Try-All tyres. The difference in durometer should show that, but the feel of them is massively different. Gav packed a pair of Try-All Lite tyres today and they just feel incredibly stiff and non-malleable compared to the Continentals. Quote Link to comment Share on other sites More sharing options...
cai Posted July 20, 2010 Report Share Posted July 20, 2010 I wish the Trials Queen was actually 2.2 wide, theres no way I'll fit one in my '06 Pure if they're the size of Adam's Quote Link to comment Share on other sites More sharing options...
casualjoe Posted July 21, 2010 Report Share Posted July 21, 2010 OK cool, are you in contact with the guys at Korbach so you can give rider feedback on these tyres? We could have the perfect rear tyre someday Quote Link to comment Share on other sites More sharing options...
walker Posted July 21, 2010 Report Share Posted July 21, 2010 How does the width and volume of the 2.2 Trials Queen compare to the 2.4 Rubber Queen? Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 OK cool, are you in contact with the guys at Korbach so you can give rider feedback on these tyres? We could have the perfect rear tyre someday I believe Stan and Adam are - Stan's currently got a different front tyre on from Conti that's another hybrid prototyp sorta thing, so I'd imagine so... How does the width and volume of the 2.2 Trials Queen compare to the 2.4 Rubber Queen? That's the RQ. Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 I wouldnt be able to fit one into the triton, the width isnt an issue but when it was new, the RQ used to scuff on the seatstay brace, these tyres are much taller Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 Which rim are you using? Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 Which rim are you using? DX32, I guess the narrower rim will push it outwards a bit more though, not measured it. Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 The rim we usually use is the DX32 rim, then we just add X to the width and Y to the height to work out how it would be on a 47mm rim. On the DX-32, it worked out as being nearer 58mm wide and 54mm tall. I'll go and measure it now and let you know... Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 58mm wide and 55mm tall on a DX-32 - just measured it to check Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 58mm wide and 55mm tall on a DX-32 - just measured it to check Maybe it will fit with a little scuffing then Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 If the RQ ended up fitting, I'd imagine this one will too to be honest. Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 If the RQ ended up fitting, I'd imagine this one will too to be honest. Possibly, it was really mm tight though. Suppose I could grind a couple of mm off the brace as its only a plate, sacrilage to grind a triton frame though Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 This tyre's worth. Rode Red Scar rocks with Adam yesterday and it was pretty nuts. Definite upgrade over the Rubber Queen (and every tyre that isn't a Der Kaiser or Rain King). Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 This tyre's worth. Rode Red Scar rocks with Adam yesterday and it was pretty nuts. Definite upgrade over the Rubber Queen (and every tyre that isn't a Der Kaiser or Rain King). When my RQ dies I will definitely look at these, hows the weight compare, are they really 100g lighter than the RQ? Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 Indeedy. Weighed by my own hands on the scales on the desk to my left. They're based on the 2.2" RQ carcass, hence them weighing less. The Apex inserts are poached from the RQ (and lengthened) hence them weighing more than the 2.2" RQ. The grip's insane though. Checked an order for an Echo Supatrial tyre today and the difference in compound was incredible... Quote Link to comment Share on other sites More sharing options...
forteh Posted July 22, 2010 Report Share Posted July 22, 2010 Indeedy. Weighed by my own hands on the scales on the desk to my left. They're based on the 2.2" RQ carcass, hence them weighing less. The Apex inserts are poached from the RQ (and lengthened) hence them weighing more than the 2.2" RQ. The grip's insane though. Checked an order for an Echo Supatrial tyre today and the difference in compound was incredible... Good stuff, the RQ seems grippy enough for me as it is, a little more stability at lower pressures would be nice though or am I better going for a DK or RK? Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 22, 2010 Author Report Share Posted July 22, 2010 They would be more stable, but the TQ is still pretty stable. The DK/RK are about 300g or so more than the TQ, so it's whether you want to add that on, really. They're super good tyres but I'd say they aren't really for everyone... Quote Link to comment Share on other sites More sharing options...
nyoli Posted July 25, 2010 Report Share Posted July 25, 2010 the trial queen has a really soft compound I've schwalbe's web, and I'm not able to find the hardness of the muddy mary tyre. Is the hardness also known as EPI ? (check the link) http://www.schwalbe.com/gbl/en/produkte/mtb/produkt/?ID_Einsatzbereich=5&ID_Produktgruppe=42&ID_Produkt=179&ID_Artikel=338&info=1 Quote Link to comment Share on other sites More sharing options...
ghostrider88 Posted July 25, 2010 Report Share Posted July 25, 2010 the trial queen has a really soft compound I've schwalbe's web, and I'm not able to find the hardness of the muddy mary tyre. Is the hardness also known as EPI ? (check the link) http://www.schwalbe.com/gbl/en/produkte/mtb/produkt/?ID_Einsatzbereich=5&ID_Produktgruppe=42&ID_Produkt=179&ID_Artikel=338&info=1 Nope,it´s not the hardness of compound Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted July 27, 2010 Report Share Posted July 27, 2010 Is the hardness also known as EPI ? (check the link) Click where it says 'EPI': Ends Per Inch (Threads per Inch): Unit for the density of the carcass fabric. the higher the EPI, the denser ther carcass and so the higher the quality of the tire. Quote Link to comment Share on other sites More sharing options...
flatpro Posted July 29, 2010 Report Share Posted July 29, 2010 any more reviews of the trialqueen yet? Quote Link to comment Share on other sites More sharing options...
Akira_Shock! Posted July 30, 2010 Report Share Posted July 30, 2010 How big was the first batch Tarty got? Any news on when the 2nd batch might be released? seems these tires are gonna be pretty popular by the soundsof it. Partially cos my current Maxxis is wearing slow and i fancy a 'Trial Queen' logo too Quote Link to comment Share on other sites More sharing options...
Mark W Posted July 30, 2010 Author Report Share Posted July 30, 2010 I think we got over 50 tyres in total (that's a mix of TQ and TK tyres), but that isn't the whole first batch. Got no idea how many others there are out there, so as a result have no idea if/when you might be able to get some with the names written on them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.