Jump to content

07 T-Pro


Kenny--Trials

Recommended Posts

They're 1000 if you measure with some decent forks, 1020 with the shocking Onza forks.

Not sure if they still do it, but Onza used to make all their forks around 380mm long, and just weld on different mounts for Mod or Stock... Ideally you want 360ish for mod and 400 for stock.

This means that the wheelbases are longer on mods with Onza forks. I once managed to get my old Zona to measure 1075mm. It had T-Pro forks, and a knackered chain, so the rear wheel was pulled right back in the dropouts and the slaves had to be angled downwards just to reach the rim. Rear brake was terrible of course but it looked rather funny.

EDIT: In regards to the different years, they're identical apart from in 2007 and onwards they stopped welding the gusset that they all crack at all the way round.

Edited by Muel
Link to comment
Share on other sites

Muel I'm having that exact same problem with the rear brakes! When my chain is tensioned to what I think to be a good tension my wheel is pulled back too far and my brakes have to be angled towards the rear of the bike. You fixed this with a new chain? What was up with it? Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...