Alle.C Posted June 20, 2010 Report Share Posted June 20, 2010 (edited) hi guys, yesterday I was going to clean my worldcat disc brake (I've never done that before) and when I took of the cap on the lever, the big seal flew out and I can't make it fit right Edited June 20, 2010 by Alle.C Quote Link to comment Share on other sites More sharing options...
Revolver Posted June 20, 2010 Report Share Posted June 20, 2010 Cram it in, cram it in harder. Quote Link to comment Share on other sites More sharing options...
Matt Burrows Posted June 20, 2010 Report Share Posted June 20, 2010 Cram it in, cram it in harder. Good advice... The seal should be very easy to fit and should line up with the reservoir perfectly. If it doesn't then it has swollen up, probably due to water or other contaminants in the fluid. If this is the case then you might need new seals all round, if the calliper seals have swollen up as well you will have a very slow brake! Quote Link to comment Share on other sites More sharing options...
Revolver Posted June 20, 2010 Report Share Posted June 20, 2010 Good advice... Heh, yeah =/ I would've thought it would be a tight fit. I'd've never thought it could swell though. You learn something new every day! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.