Matt Vandart Posted May 12, 2010 Report Share Posted May 12, 2010 How does one remove trialtech foam grips without f**king them up? Quote Link to comment Share on other sites More sharing options...
Luke Rainbird Posted May 12, 2010 Report Share Posted May 12, 2010 Spoke under as far as you can without ripping, spray in some lube (GT85 etc), remove spoke and away you go - may take a little wiggling to get them fully unstuck at first. Remember to wipe out the lube before remounting to avoid throttlegrip. Water can work too. Quote Link to comment Share on other sites More sharing options...
Riley1 Posted May 12, 2010 Report Share Posted May 12, 2010 (edited) I find that a great way to take grips off without using lube is to undo the brake lever so that it is loose, push it up to the edge of the grip and rotate the lever backwards and forwards about a quarter rotation whilst pulling against the grip towards the end of the bars. Keep wiggling and the grip will come off a treat, never failed me so far Edited May 12, 2010 by Riley1 Quote Link to comment Share on other sites More sharing options...
Matt Vandart Posted May 12, 2010 Author Report Share Posted May 12, 2010 Thanks dudes. Didn't want to use the gt 85 method because the last time I did that with tt grips they never stuck again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.