Jump to content

Waste Of Money?


modifiedridah2k9

Recommended Posts

i use V's on front and back of my mod and did on my stock till i sold it. I like V brakes better then HS33, they seem to hold better in my oppinion and the leaver seems easier to pull in if you have a decent cable.

i ran on my stock SD7 callipers on the back with SD7 leaver and on front Shimano Acera callipers with SD7 leaver. both with clark cables this was a awsome set up.

on my mod i tryed running the same set up but the SD7 callipers were two small for the back wheel so moved them to the front and put the Shimano Acera callipers on the back as they were taller. I find this set up even better then i had on my stock.

So in my oppinion, yes it would be a waste of money. I rate the Shimano Acera callipers more then the SD7 ones and they are the cheapes ones on tarty i love the SD7 leavers though they are ace, work well and are cheap.

Link to comment
Share on other sites

I'd always take a vee over a Magura, but wouldn't pay full whack for a new Ultimate. An SD7 will provide more than adequate braking if set up well, and at a fraction of the price.

That said, I run a pair of Ultimates because I managed to get the set for under £50 second hand and given the choice, wouldn't run anything else! :)

  • Like 1
Link to comment
Share on other sites

i have ultimate leaver, ultimate arms with plaz cnc pads and a clarks cable and i prefer it a lot more to my old front magura as i have a lot more things to play around with for the best set up to anybody who rides it :), so i would say there is an advantage to it but the price could put you off (N).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...